tracking pixel
DT

Pool Filter Waste Port 1.5" to 1.25" Hose Adapter

by
rebeltaz
Follow
Follow
Remix Model
Pool Filter Waste Port 1.5" to 1.25" Hose Adapter 3d model
Pool Filter Waste Port 1.5" to 1.25" Hose Adapter 3d model
2D
3D
Makes
Be the first to upload a Make
This model is restricted by licensing terms. 
1 Likes6 DownloadsApril 26, 2022
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2944580.

This is a quick little adapter that I drew up to adapt a 1¼" pool hose to fit a 1½" connector on a pool filter's [Waste] port. This isn't really designed for the high pressure so, while you could use it on the intake side of a pool pump, I would not recommend it on the high pressure output side. For the waste side, though, this works just fine and gets the job done. Plus, it's a quick solution to a problem when you need something in the middle of the night on a weekend out in the sticks :)

UPDATE 7-4-18 My first version sprunk a few pinhole leaks due to not using enough walls and too little infill, so since I had to reprint it anyway, I went ahead and modified the design a tad. I got rid of the taper fit on the output side and made it a straight fit on which you can clamp the hose. The file for this is _notaper.


Another Sketchup Model - Debunking the Myth that Sketchup is Useless in 3D Printing


1 Likes6 DownloadsApril 26, 2022




This model is restricted by licensing terms. 
1 Likes6 DownloadsApril 26, 2022
This model is restricted by licensing terms.