Discussions — Cthulhu - Wall Decoration

Discussions

stevenpoole19682 years ago

charcoal black polymaker and silver rub-n-buff

Glendon3d2 years ago

Jararaca2 years ago

What stand do you have displaying it?

miak3D2 years ago

solar3dp2 years ago

matthewd6561 year ago

It's a fantastic model and looks great with the Bambu galaxy green, but I had two failed attempts. This was the third one after some adjusting but the back still failed and I'm not sure how to fix it

PrinterBambu Lab P1S

Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm

MaterialPLA

Layer height0.2 mm

Infill density15 %

Charro 2 years ago

Trevor3DPrints2 years ago

Printed on Bambu X1C at .08 Layer Height W/Bambu PLA Basic Gradient Ocean Meadow

Blobguy1 year ago

georgmierau2 years ago

Printed hollow at 50% scale on Elegoo Mars 3 Pro using 35 µm layers and Sunlu ABS-like resin. Primed with The Army Painter black primer and drybrushed with "Greedy Gold". Great design!

tajdthreed2 years ago

Super Cthulhu model! Love those posted pics of the metal-fill prints with patinas but alas, regular ol' PLA is all I have. Printed in just under 4hrs.

PrinterOther

Printer modelSelf designed corexy

Print bed sizeX: 310 mm; Y: 310 mm; Z: 420 mm

MaterialStandard

Layer height0.12 mm

SkidMarxist2 years ago

Used a magnet and some Velcro tape to make it easily removable. I'm leaving it as a fridge magnet. This would probably be stolen off my front door, which apparently has metal through it.