tracking pixel
Pikachu Without Support… Literally! ⚡️

Pikachu Without Support… Literally! ⚡️

Today, I’m excited to introduce the Pikachu Support-Free model! ⚡️ This electric-type favorite is here to light up your 3D printing journey without the hassle of support structures.


Inside the file, you will find:

✅ multipart model

✅ completed model

✅ pre-painted 3MF files for our Bambulab users!


Pro Tips:

* Print this at least at 100%—bump it up to 120% if your printer tolerances are low!

* At 100%, the iris might be tricky for some to assemble. If that happens, reprint it at 97% or 94% to make assembly easier.

* The nose is the toughest part to put together, so be patient with that or scale the model up for a better experience.

* I did a filament change to get the right colors on the tail.


Settings:

🎨 Layer lines: 0.2 mm

🛡️ Walls: 2 walls

🧀 Infill: 7%

🌡️ Temperature: 220°C nozzle and 65°C bed

🚀 Speed: 60 mm/s

🛠️ Support: no

🍃 Raft/brim: Only for tail and iris

If you’re part of my awesome Thangs community, head on over to the models secionand grab that STL file! If you’re not yet a member, what are you waiting for?? Join in and print your very own Pikachu! 😄

Download link: Pikachu Support Free - Multipart - 3D model by pressprint on Thangs

Don’t forget to share your makes in the Thangs community! I can’t wait to see your electrifying prints!


Happy printing, and may your prints be as electric as Pikachu! ⚡️


Comments