This design was made with you in mind :)

This Arch Invisible Book Shelf is actually so satisfying when I printed it for the first time! It's kinda cool as you print it in two parts of structural rigidity, but then the arch backdrop gets clamped against the wall with the screws! No supports too :)

Become a member to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original” Note: If you are interested in a commercial license to sell prints of my designs, you must obtain the license by signing up for my Entrepreneur membership tier!
Model Assembly Pretty simple for this one — print the single plate in a color that matches your vibe, screw the shelf to the wall, and load your books for all to see!

Watch the associated reel showing the assembly on my instagram page @mcinventiveproductions

Materials Bambu Lab Matte PLA (Latte Brown) — https://us.store.bambulab.com/ Standard Drywall or Wood Screws around 1" or 1-1/4" in length

Print settings Material — PLA Print orientation — as shown in slicer images on this post! Nozzle size: 0.4 mm Layer Height: 0.28 mm (use ironing for best surface finish!) Infill: 15% Bed Size of my Printer: 256x256mm
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at no extra cost to you!