Folding Hanger

This is a folding clothes hanger that is printable on a 220mm x 220mm bed. It is a companion product to my StashHanger.

100% printed, snap-together - no hardware, fasteners, or adhesives required. No support required

Recommended Print settings: Nozzle = 0.4mm Layer height = 0.2mm Line width = 0.4mm Wall count = 4 (1.6mm) Infill = 40% Ironing = ON

Commercial Licensing is available through my Thangs Memberships.

Also check out my StashHanger... https://than.gs/m/1092736