Came out great with a 0.6mm nozzle! I had a bit of elephants foot because I started the print before the chamber heat settled. However, this model was designed quite well, and it didn't end up being an issue. Thanks!
I was interested in this design and printed it, but unfortunately, when I tried to use it, a part of it broke.
When adjusting the clamp height, this part needs to be opened wide, so it might be less likely to break if it is made stronger or more flexible.
The other parts were printed without any issues, and the provided instructions made it easy to assemble. Thank you.
I followed all the settings and it printed very well but the slider will no slide onto the main piece without getting stuck even before it gets down to the ribs. Any ideas what I can do different besides sanding on it?
I had a similar experience. The printing looked really great, but I wasn't able to get the Slider onto Main at all. I am using PLA with an Anycubic Kobra Go. I printed Benchy earlier in the day, and it came out very clean also.
Are you able to see where the interference is? I could send you a version to test with more clearance if you are interested. Please email me at pdb6251 gmail.com and I can send you a test file.
Sanding should work but should not be needed so I guess there is something else wrong. Perhaps some first layer squish or some lifting on the first layers which causes some distortion. Also, try a very small amount of lubricant. Can you see where it is binding or not fitting well? If you want to send me some photos by email to pdb6251 gmail.com I will try to help you.
Hi. It would be great if the lever wasn't longer than the slider. I want to attach it to a couch, and the lever prevent me to put it further in, as the couch arm goes down to the floor.
The modular design sounds really convenient, especially with the tool-free assembly moon phase soulmate calculator. Being able to quickly attach and remove it makes it super versatile for different setups.
Discussions — ClampDock (modular clamp-on system)
Awesome. Thanks for posting and your comments.
By the way do you think one of the attachments for it can be a phone holder cool?
I will try to come up with one. Thank you.
I followed all the settings and it printed very well but the slider will no slide onto the main piece without getting stuck even before it gets down to the ribs. Any ideas what I can do different besides sanding on it?
I had a similar experience. The printing looked really great, but I wasn't able to get the Slider onto Main at all. I am using PLA with an Anycubic Kobra Go. I printed Benchy earlier in the day, and it came out very clean also.
Are you able to see where the interference is? I could send you a version to test with more clearance if you are interested. Please email me at pdb6251 gmail.com and I can send you a test file.
Sanding should work but should not be needed so I guess there is something else wrong. Perhaps some first layer squish or some lifting on the first layers which causes some distortion. Also, try a very small amount of lubricant. Can you see where it is binding or not fitting well? If you want to send me some photos by email to pdb6251 gmail.com I will try to help you.
Hi. It would be great if the lever wasn't longer than the slider. I want to attach it to a couch, and the lever prevent me to put it further in, as the couch arm goes down to the floor.
Hi, I just added a shortened lever to the posting. Please let me know how it works for you.
Oh. Ok. I will look into that tomorrow.
This is begging for a way to mount on top of doors or similar profiles, like the edges of big plastic boxes.
Similar to your spare toilet paper hanger, but compatible with all the accesories you built for this. :)
Thanks for sharing.
Great idea! I will add that to the list of expansion designs for this.
I just printed it and assembled is is good it is tight! So I this I can put some heavy stuff on it good try dude this is awesome
Would this be strong enough for a big/heavy water bottle?
This is the most useful and well made print series that is FREE too
Dude, I downloaded a bin with this concept, but there was only a bin. You did several things and this is AWESOME! Thank you very very much!
Thanks brah!
do you have a sideways clamping dock?
No, but I don’t mind attempting one. What kind of structure do you wan5 to clamp on to?
The modular design sounds really convenient, especially with the tool-free assembly moon phase soulmate calculator. Being able to quickly attach and remove it makes it super versatile for different setups.