Do your Uno cards fit this now? And, you just need the deeper version for more cards? I have that and will post it shortly. Also, I will make versions for other card sizes if you need it, please let me know the dimensions.
There are no silly questions…. The interlock allows you to snap the bottom of the base to the top of the cover. This effectively converts the cover to a stand.
I'm a little confused how that works... Do I need to pop the inter-lock out and change it somehow to snap the bottom of the base to the top of the cover
Yes, the interlock has two positions. the first is flush with the base. The second is extended below the base and then it can snap into the top of the inverted cover.
This is some of the best designing i have seen its crazy good. Well done!!! Everything just fits togeter and works amazing the self aligning part is a bit unecesary but its fun and works great
Really nice model!
I would also love to have an addon option for keeping the "collecting mechanism" open, that would make it even better to have on the table while playing. I'm not sure how such an addon should be, but if you do have some great idea for it... :)
has anyone had an issue with the single playing card deck? the top and bottom are loose and they dont stay in the simple sleeve? all the rest worked great, UNO, Bridge ect.
Hi, that sounds unusual. You are the first person to tell me this. I hope perhaps you have mixed up some files but I would like to test it myself to be sure. Can you tell me the exact STL file names you are printing so I can test the same ones?
Yes, probably depending on their size. But I need to know the exact size of the cards and the thickness of the deck. Please email me at logicalplanet3d gmail.com and I will do it if you send me the dimensions.
Could you make a 5 crowns set please? 116 cards. I don't have the dimensions. I thought they were standard playing card size but they're smaller. I'll have to measure them but don't have my calipers at the moment.
I created my own custom game and my cards are oddly sized. I already printed this holder for a deck of cards and would love to have it for my new game. My cards are 2.25 in. (57.5 mm)x 3.75. (95.5 mm)x 1.25 in. (32 mm) (height). Any chance you could make that happen for me? Thanks and great card holder idea.
Hey mate, this is an awesome design! Very well done, thank you!
In my case for Magic Cards, the perfect dimensions for a 60 card deck with sleeved cards would be:
93mm x 69mm x 50mm (height)
If you could provide me with this, I would very appreciate.
Have a good one!
Hi, I have spanish cards of exactly 92mm x 57mm and the height of the deck of cards is of 17mm, I did not find any CarDock with those mesurements and I would like to have one
People been asking for TCG decks ,with sleeves I assume.
But, the first thought I had is Planeschase: it's some weird card use is MTG to hmm change Abit the game.
But I hate that I don't have a clean solution to storage and I would also love to use it as a stand, I don't have sleeves big enough for them so would be kinda easy I think? They are twice as big as regular mtg cards. I think less than 100 different exist so could design some thing near that ish. Do you think I can just scale the model up?
I might add storage for a Planeschase dice somewhere too
I have a deck of Uno that fits this exactly. Do you have a different size card? Can you tell me the dimensions? I have already made a double deck version and will post it soon if that is what you need.
Can you give me the card dimensions and I will see? Include card thickness and how many cards in the deck. I am working on some other variants already so if I can make it fit the sizes you want I will.
Discussions — CardDock - Auto-aligning CardDeck Holder and Case
Thank you for the feedback and posting the make.
Man I need this for a full deck of UNO cards... Great model!
Uno version Posted.
Do your Uno cards fit this now? And, you just need the deeper version for more cards? I have that and will post it shortly. Also, I will make versions for other card sizes if you need it, please let me know the dimensions.
Could you make one for UNO No Mercy? (Same size, but 168 count) Thank you! The size works perfectly for my regular decks!
Uno No Mercy is now available here.,.. https://than.gs/m/1354536
This would be great for MTG cards
Really nice model, works great. As very much not an engineer, I have what is probably a silly question: what does the interlock actually do?
There are no silly questions…. The interlock allows you to snap the bottom of the base to the top of the cover. This effectively converts the cover to a stand.
I'm a little confused how that works... Do I need to pop the inter-lock out and change it somehow to snap the bottom of the base to the top of the cover
Yes, the interlock has two positions. the first is flush with the base. The second is extended below the base and then it can snap into the top of the inverted cover.
This is some of the best designing i have seen its crazy good. Well done!!! Everything just fits togeter and works amazing the self aligning part is a bit unecesary but its fun and works great
Haha, I know it is so unnecessary but it feels good! Funny how things are like that. Appreciate your comments and feedback. Thank you.
Really nice model! I would also love to have an addon option for keeping the "collecting mechanism" open, that would make it even better to have on the table while playing. I'm not sure how such an addon should be, but if you do have some great idea for it... :)
Interesting idea. I will give it some thought.
has anyone had an issue with the single playing card deck? the top and bottom are loose and they dont stay in the simple sleeve? all the rest worked great, UNO, Bridge ect.
Hi, that sounds unusual. You are the first person to tell me this. I hope perhaps you have mixed up some files but I would like to test it myself to be sure. Can you tell me the exact STL file names you are printing so I can test the same ones?
Do you have a dock for a 1/2 deck, for Euchre?
if you tell me the card dimensions and the stack height I can make it for you.
Really neat! Great job!
any chance you can do one for a 4 deck?
Standard cards? I can try but I think it will be less effective. Email me at LogicalPlanet3d gmail.com and I can send you one to test.
How hard would it be to make one of these for Cards Against Humanity?
If you tell me the card size I can give probably make it for you!
Need this for CAH
If you can tell me the dimensions of whatever that is I can make it for.
Anyone have had and issue with the width? the Length is correct at 89mm but the width. 59mm (58.8) instead of 64mm.
I have dozens of variations of this. Let me know what size you need and I can send it to you. Email m3 at logicalplanet3d Gmail.com
can you make a version with 100mm x 56mm for bavarian Playing cards?
HI yes, I have that one. Sorry I missed your question earlier. If you email me at logicalplanet3d gmail.com I can send it to you.
Could you design one for Tarot?
Yes, probably depending on their size. But I need to know the exact size of the cards and the thickness of the deck. Please email me at logicalplanet3d gmail.com and I will do it if you send me the dimensions.
Hey, could you design one for german "schafkopf" playing cards? They are 56mmx100mm and 36 cards. Thank you!
For sure. Can you email me at logicalplanet3d gmail.com and I will send it to you.
Could you make a 5 crowns set please? 116 cards. I don't have the dimensions. I thought they were standard playing card size but they're smaller. I'll have to measure them but don't have my calipers at the moment.
If you can email me the dimensions I will try to make it. Please s3nd to logicalplanet3d Gmail.com
Hi! I love the design! Would it be possible to add a Spanish card version in the future?
I have already made the spanish version. Please email me at logicalplanet3d gmail.com and I will send it to you.
My bad... I did not see the version when I was checking, I'm on my way to test it. Many thanks!
Hi, Wonder if you could look at Fluxx card game? 8.7cm x 5.6cm. 100 cards? Please and thank you
For sure, please email me at logicalplanet3d Gmail.com and I will send you one for testing.
Did you post the Pokémon deck aligner?
Yes, it is here... https://than.gs/m/1333423
I would love this for Dutch Blitz (3.25x2.25) - or a parametric version would be AMAZING
If you email me at logicalplanet3d gmail.com I will send you one to test.
I created my own custom game and my cards are oddly sized. I already printed this holder for a deck of cards and would love to have it for my new game. My cards are 2.25 in. (57.5 mm)x 3.75. (95.5 mm)x 1.25 in. (32 mm) (height). Any chance you could make that happen for me? Thanks and great card holder idea.
For sure I will. But I have the flu right now. So give me a few days.
Sounds good, I sent the same thing to your email. Just let me know whenever you finish it. Thank you and hope you get better soon.
Using petg the lids didn't fit, I remade them in Freecad, They work well for me. I will post my remake!
Thank you. Do you know why your PETG print does not fit? It should be the same as PLA.
Hey mate, this is an awesome design! Very well done, thank you! In my case for Magic Cards, the perfect dimensions for a 60 card deck with sleeved cards would be: 93mm x 69mm x 50mm (height)
If you could provide me with this, I would very appreciate. Have a good one!
I believe this model with fit that... https://than.gs/m/1336472
Kind of a weird size request... I have a deck of Elevation of Privilege cards I'm trying to fit. 124x74x40. Id super appreciate a remix!
It is quite large but I will give it a try. Can you email me at logicalplanet3d gmail.com and I will send you a prototype for testing.
Hi, I have spanish cards of exactly 92mm x 57mm and the height of the deck of cards is of 17mm, I did not find any CarDock with those mesurements and I would like to have one
Can you email me at logicalplanet3d gmail.com and I will send you a prototype design to test.
Email Sent 😁
reply sent by email
This would be perfect For an idea I have for a ssd hard drive holder. Can we collaborate on a project?
For sure, email me at logicalplanet3d gmail.com
very cool design!
People been asking for TCG decks ,with sleeves I assume. But, the first thought I had is Planeschase: it's some weird card use is MTG to hmm change Abit the game. But I hate that I don't have a clean solution to storage and I would also love to use it as a stand, I don't have sleeves big enough for them so would be kinda easy I think? They are twice as big as regular mtg cards. I think less than 100 different exist so could design some thing near that ish. Do you think I can just scale the model up? I might add storage for a Planeschase dice somewhere too
Any chance you can send me the exact dimensions of the cards? If you can I will make.
Ah I measure them myself and it's a bit different from what internet says : 12.7cmx 8.9cm
3.5" x 5" / 9 x 12.5 cm and the height of my pile is 3cm (for 89cards, the max is 111, but I don't know if basically anyone have all of them)
Any chance you would be available to test the design for me? Can you email me at logicalplanet3d gmail.com and I will send you the files for testing.
Hey!! this looks awesome do you think you can make one for an average pokemon deck (60 cards)
Absolutely. I should have a few more versions released in the next few days or so. If one of them does not fit your needs let me know.
please size this for uno cards
I have a deck of Uno that fits this exactly. Do you have a different size card? Can you tell me the dimensions? I have already made a double deck version and will post it soon if that is what you need.
Done. It is posted.
I LOVE THIS MODEL!! However, I was wondering if you could make the lid more protective and cover most of the cards.
Done, please check out the new cases.
Are you think instead of the existing lid or in addition to the existing lid? I can see merit to both solutions.
Yes. I can add another lid.
The assembly picture make it look like piece D is being inserted upside down unless I'm crazy. Good model though.
Yes, you are right. I will fix that. Thank you.
Is this easy enough to resize for American mini sized cards and oversized ones too?
Can you give me the card dimensions and I will see? Include card thickness and how many cards in the deck. I am working on some other variants already so if I can make it fit the sizes you want I will.
lid is too small
Cannot you explain or send a photo?