50% off the entire collection of 3D emoji hands.

Sending Love! This is the Heart Hands emoji; two hands with thumbs and curled fingers together in the shape of a heart.
Part of Emoji 14.0.

This download includes the following STLs:
- Solid (unsupported)
- Hollow (for MSLA resin printing)
- Split (for support free FFF/FDM printing)

The split model can be printed without supports and glued together with cyanoacrylate super glue. Place a few dabs of glue on each half, align halves by placing wrists on a flat surface, and press together.

Printing 0.12mm layer height @5% infill on an X1C takes about 2 hours.

Dimensions (approx.):
- 76mm height
- 137mm width
- 40mm depth

EMOJI HAND 🫶 HEART HANDS

Heart Hands (solid).stl

This hand has the index finger and thumb extended in a pinching gesture. There is a 0.5mm gap between the finger and thumb. Part of Emoji 12.0.

Printed with wrist on the build plate, automatic tree supports.
0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 73mm wrist to fingertip
- 40mm width
- 28mm diameter wrist

EMOJI HAND 🤏 PINCHING HAND

Pinching Hand.stl

This is just the hand portion of the Thinking Face emoji. Provide your own face. I've included a mountable version with an 8mm flanged cylindrical cutout in the base that can fit a pencil or Bic pen. Part of Emoji 1.0.

Printed with wrist on the build plate, automatic tree supports.
0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 80mm wrist to fingertip
- 70mm width
- 28mm diameter wrist

EMOJI HAND 🤔 THINKING FACE HAND

Thinking Face Hand (mountable).stl

F*@& You! This is the Middle Finger emoji. A rude gesture with the middle finger extended. Part of Emoji 1.0.

Printed with wrist on the build plate, automatic tree supports.
0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 77mm wrist to fingertip
- 50mm width
- 26mm diameter wrist

EMOJI HAND 🖕 MIDDLE FINGER / RUDE FINGER

Middle Finger.stl

This is the Raised Hand with Fingers Splayed emoji. Part of Emoji 1.0.

Printed with wrist on the build plate, automatic tree supports.
0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 83mm wrist to fingertip
- 75mm width
- 28mm diameter wrist

EMOJI HAND 🖐️ HAND WITH FINGERS SPLAYED

Hand with Fingers Splayed.stl

Presenting to the Emergency Room... This is the Index Pointing up emoji with the index extended and the thumb holding the other three fingers. Part of Emoji 1.0.

"-emia means presence in blood."
~ChubbyEmu

Printed with wrist on the build plate, automatic tree supports. 0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 87mm wrist to fingertip
- 46mm width
- 25mm diameter wrist

EMOJI HAND ☝️🫵 INDEX POINTING

Index Pointing.stl

Point in whatever direction you want. This is the Index Pointing Backhand emoji with the index and thumb pointing and the rest of the fingers curled. Part of Emoji 1.0.

Printed with wrist on the build plate, automatic tree supports. 0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 88mm wrist to fingertip
- 51mm width
- 25mm diameter wrist

EMOJI HAND 👆👉👇👈 BACKHAND INDEX

Backhand Index Pointing.stl

Good luck and white lies. This is the Crossed Fingers emoji with the index and middle fingers crossed and the thumb holding the ring and pinky. Part of Emoji 3.0.

Printed with wrist on the build plate, automatic tree supports. 0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 85mm wrist to fingertip
- 43mm width
- 28mm diameter wrist

EMOJI HAND 🤞 CROSSED FINGERS

Crossed Fingers.stl

EMOJI HAND 👌 OK HAND SIGN

OK Hand (left).stl

"I Love You" is formed by combining I, L, Y letters in ASL to make this one handed sign. Part of Emoji 5.0.

Printed with wrist on the build plate, automatic tree supports.
0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 82mm wrist to fingertip
- 74mm width
- 25mm diameter wrist

EMOJI HAND 🤟 LOVE YOU GESTURE

Love-you Gesture.stl

Power. This is a Raised Fist emoji. Can also be thrown as Rock when playing Rock/Paper/Scissors. Part of Emoji 1.0.

Printed with wrist on the build plate, automatic tree supports.
0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 53mm wrist to knuckle
- 45mm width
- 27mm diameter wrist

EMOJI HAND ✊ RAISED FIST

Raised Fist.stl

This hand can be posed as either the Raised Hand or the Back of Hand emoji. (right hand) It can also be thrown as Paper when playing Rock/Paper/Scissors. Part of Emoji 1.0.

Printed with wrist on the build plate, automatic tree supports.
0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 92mm wrist to finger tip
- 57mm palm + thumb
- 27mm diameter wrist

EMOJI HAND ✋🤚🫲🫱 RAISED/BACK HAND

Raised Hand.stl

Rock On! This is the Sign of the Horns emoji. (right hand) Part of Emoji 1.0.

Printed with wrist on the build plate, automatic tree supports. 0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 85mm wrist to fingertip
- 49mm width
- 25mm diameter wrist

EMOJI HAND 🤘 SIGN OF THE HORNS

Sign of the Horns.stl

This is the Pinched Fingers emoji. Both left and right hands are included so you can print a pair. Part of Emoji 13.0.

Printed with wrist on the build plate, automatic tree supports. 0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 66mm wrist to fingertip
- 38mm width
- 25mm diameter wrist

EMOJI HAND 🤌 PINCHED FINGERS / ITALIAN "MA CHE VUOI?!" GESTURE

Pinched Fingers (left).stl

This is the Victory Hand emoji with the index and middle finger in the shape of a V. Also used as a Peace sign and Scissors in Rock/Paper/Scissors. Part of Emoji 1.0.

Printed with wrist on the build plate, automatic tree supports. 0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 91mm wrist to fingertip
- 45mm width
- 25mm diameter wrist

EMOJI HAND ✌️ VICTORY HAND / PEACE SYMBOL

Victory Hand.stl

Shaka! This is the Call Me gesture emoji where the index, middle, and ring fingers are curled with the thumb and pinky extended. Part of Emoji 3.0.

Printed with wrist on the build plate, automatic tree supports.
0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 68mm wrist to knuckle
- 75mm pinky to thumb
- 25mm diameter wrist

EMOJI HAND 🤙 CALL ME HAND / HANG LOOSE

Call Me Hand.stl

This gesture is popular amongst K-pop stans. The hand has the index finger and thumb crossed into the shape of a small heart. Part of Emoji 14.0.

Printed with wrist on the build plate, automatic tree supports.
0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 72mm wrist to finger tip
- 45mm wide
- 25mm diameter wrist

EMOJI HAND 🫰 HEART FINGERS / HAND WITH FINGER AND THUMB CROSSED

Hand with Index Finger and Thumb Crossed.stl

Live Long and Prosper! This is the Vulcan Salute emoji. (Right hand) Part of Emoji 1.0.

Printed with wrist on the build plate, automatic tree supports.
0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 81mm wrist to finger tip
- 51mm palm + thumb
- 25mm diameter wrist

EMOJI HAND 🖖 VULCAN SALUTE

Vulcan Salute.stl

This is the Thumbs Up/Down emoji. (Right hand) Part of Emoji 1.0.

Printed with wrist on the build plate, automatic tree supports.
0.12mm layer height @5% infill on an X1C takes about an hour.

Dimensions (approx.):
- 54mm wrist to knuckle
- 72mm palm + thumb
- 25mm diameter wrist

EMOJI HAND 👍👎 THUMBS UP/DOWN

Emoji Hand - Thumbs.stl

Unicode Emoji Hands

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

kelnishi