March is here and Spring season is around the corner 🌷
For this occasion, I decided to bring some cute and cheerful models
I think these little bunnies might be, other than a pretty decoration, also a perfect gift even for young children, both as toys and as models to practice some paintings 🎨
Hope they can bring you a smile and some happiness in your lives 🐰
Book Lover Bunny (2) : https://thangs.com/RandomizY/Book%20Lover%20Bunny%20(2)-54770
#MakerMadness ⸻⸻⸻⸻⸻⸻⸻⸻ Please don't forget to leave a like if you enjoy my work! ⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :
- 3D Printer: Anycubic Mega SE
- Nozzle: 0.4 mm
- Slicer: Ultimaker Cura 4.13.1
- Layer height: 0.16 mm (0.4 mm wall thickness; 4 top / bottom layers)
- Infill : 10%
- Some supports needed (mostly on the lower part)
- Printing Temperature: 205°C / Build Plate Temperature: 60°C
- Print speed: 45 mm/sec / Outer Wall Speed: 22.5mm
- Filament: Green PLA by SUNLU
- Size: 6,7 x 7,3 x 12 cm (X, Y, Z)
⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)
⸻⸻⸻⸻⸻⸻⸻⸻ 𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚. ⸻⸻⸻⸻⸻⸻⸻⸻
If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits : https://www.patreon.com/RandomizY ⸻⸻⸻⸻⸻⸻⸻⸻
INSTAGRAM : https://www.instagram.com/randomizy.3d/
TWITTER : https://twitter.com/Randomizy3D
FACEBOOK : https://www.facebook.com/randomizy.3D
Check More Here : https://linktr.ee/RandomizY