Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4086787.

This is a backup of original SD card shipped with Anet E12 printer

tree of :
Anet_E12_SD_card_content.zip
├── E12\ Assembly\ and\ Operation\ Guide\ Video
│   ├── E10-E12\ Assembly\ and\ Operation\ Guide.mp4
│   └── Thumbs.db
├── Installation\ Instruction
│   ├── E12\ Installation\ Guide.pdf
│   ├── E12\ Operation\ instruction-160905.pdf
│   ├── Print\ Quality\ Troubleshooting\ Guide-\ E12\ Anet1.0.pdf
│   ├── Thumbs.db
│   └── ~$\ 3D\ Printer\ Installation\ Instructions-170111.docx
├── Please\ read\ the\ installation\ instruction\ carefully\ before\ use..txt
├── Print\ Model\ STL
│   ├── Baymax.stl
│   ├── Box.stl
│   ├── Brush\ barrel.stl
│   ├── E12\ Printed\ Parts
│   │   ├── Base\ for\ fixing\ guide\ rod.STL
│   │   ├── Cover\ for\ the\ top\ of\ aluminum\ profile.STL
│   │   ├── Double-threaded\ bolt\ M22.STL
│   │   ├── E12\ Fan.STL
│   │   ├── Guide\ rod-Plate\ for\ limited\ switch.STL
│   │   ├── Screw\ Nut\ M22.STL
│   │   └── Top\ bearing\ installing\ base.STL
│   ├── FU.STL
│   ├── Figure.stl
│   ├── Pyramid.stl
│   └── chess.stl
├── Software
│   ├── CH340G\ Drive
│   │   ├── CH340G_windows.zip
│   │   ├── CH341SER\ English.EXE
│   │   └── CH341SER_MAC.ZIP
│   ├── Cura\ 14.07
│   │   ├── Cura\ download\ link.txt
│   │   ├── Cura_14.07.exe
│   │   └── configuration\ file\ for\ Cura-14.07.ini
│   └── RepetierHost_1_0_5
│       ├── Repetier\ download\ link.txt
│       └── setupRepetierHost_1_0_5.exe
├── Test\ file\ GCODE
│   ├── Cylinders-300-1h-mifeng.gco
│   ├── cuboid\ 50-30-50-2h-fengbi.gco
│   └── print\ documents
│       ├── Chess\ jiang-E12-2h.gco
│       ├── Fu-E12-2.5h.gco
│       └── Hoba-E12-6H.gco
└── Tool\ List&other\ pictures
    ├── 3D\ Printer\ E12\ assembly\ parts\ list1.0.pdf
    └── Thumbs.db

------

If you find it useful you can send tip or [buy me a coffe](https://www.paypal.me/tockainfo). Thanks.

Anet E12 - original STL files + SD content

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3329746.

Simple mod of Anet A8 Plotter Mount Auto Leveling by Belmiro and ANET A8 Fan Mod + BlTouch Adjustable Mount by Albebert

This is my first mod and one of first hours spend in SketchUp.

Marlin FW config:
define X_PROBE_OFFSET_FROM_EXTRUDER 57
define Y_PROBE_OFFSET_FROM_EXTRUDER -50
Z it's adjustable so can't add a value. 

Feel free to comment, print and modify it :)

**Laser Mount** -> https://www.thingiverse.com/thing:3570049



------
Feel free to print or remix and don't forget to post it.

If you find it useful you can send tip or [buy me a coffe](https://www.paypal.me/tockainfo). Thanks.

 Anet A8 - Fan Mod + Plotter Mount + BlTouch Adjustable Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3681814.

This is a remix of [thing:2974911](https://www.thingiverse.com/thing:2974911) by [mBmD](https://www.thingiverse.com/mBmD)

Mods - v1:
----------
-    added switches to USB ports
-    added USB port from standby power
-    added mounts for DC-DC converter
-    changed from banana connectors to speaker terminal
-    added new text/marks
-    added PSU ON/OFF control via switch

Required parts (approx. $9)
--------------------
-    1x 10W 10Ohm Ceramic Resistor -  [AliExpress](https://www.aliexpress.com/item/10pcs-10W-Cement-resistance-1-2-5-8-10-15-20-22-24-27-25-ohm/32858844367.html) -  (optional*)
-    1x 10k Potentiometer - [AliExpress](https://www.aliexpress.com/item/5-PCS-Lot-Potentiometer-Resistor-1K-10K-20K-50K-100K-500K-Ohm-3-Pin-Linear-Taper/32948875673.html)
-    1x Dual LED Display Mini Digital Voltmeter Ammeter [AliExpress](https://www.aliexpress.com/item/0-56inch-Mini-Digital-Voltmeter-Ammeter-DC-100V-10A-Voltmeter-Current-Meter-Tester-Blue-Red-Dual/32855521769.html)
-    1x DC-DC Step Down Converter Module LM2596 [AliExpress](https://www.aliexpress.com/item/Free-shipping-DIP-1PCS-DC-DC-Buck-Converter-Step-Down-Module-LM2596-Power-Supply-Output-1/32721507753.html)
-    3x USB A Female To DIP 2.54MM [AliExpress](https://www.aliexpress.com/item/5PCS-LOT-MICRO-USB-to-DIP-Adapter-2-54mm-5pin-Female-Connector-B-Type-PCB-Converter/32755981162.html)
-    4x SPDT Toggle Switch [AliExpress](https://www.aliexpress.com/item/Promotion-5-Pcs-AC-ON-OFF-SPDT-2-Position-Latching-Toggle-Switch-6A-125V/32813324272.html)
-    1x 12pin/2rows Speaker Terminal [AliExpress](https://www.aliexpress.com/item/2PCS-Double-Row-Red-Black-12-Pin-12-Position-Push-in-Jack-Speaker-Terminals/32954989291.html)

*Optional: 10W 10Ohm Ceramic Resistor - If your ATX PSU on PSU ON (green + black wire connected) does not start, you have to use resistor as load on PSU


Wiring
--------------------
-    Please refer to "ATX_PSU-Wiring-GregorB.pdf" or "ATX_PSU-Wiring-GregorB.png" in files section
-    Remove pot. on DC-DC board and solder other pot.


Warning
--------------------
Before any intervention, make sure that the power supply is disconnected for at least 5-10min for complete power discharge 
I decline any responsibility in case of any incident or accident or damage made.

------
Feel free to print or remix and don't forget to post it.

If you find it useful you can send tip or [buy me a coffe](https://www.paypal.me/tockainfo). Thanks.

ATX Power Supply (w/ USB, variable PSU, PSU ON/OFF, USB Standby power, USB Switches)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3657362.

Original design: [AresMars](https://www.thingiverse.com/thing:1932724) (cable chain) and [xxricsxx](https://www.thingiverse.com/thing:3141936) (frame-printer holders/mounts).

Its not perfect, but it works.
You need to print 20 chain links (more or less, depending where you place your frame holder part).

------
Feel free to print or remix and don't forget to post it.

If you find it useful you can send tip or [buy me a coffe](https://www.paypal.me/tockainfo). Thanks.

CTC Dual/Bizer - XY Cable Chain

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3570049.

Add on for -> https://www.thingiverse.com/thing:3329746

According to tutorial by Lokster -> http://lokspace.eu/anet-a8-3d-printer-laser-engraver-mod/

https://3dprint.wiki - place where I found link to tut + some other useful stuff regarding Anet A8


------
Feel free to print or remix and don't forget to post it.

If you find it useful you can send tip or [buy me a coffe](https://www.paypal.me/tockainfo). Thanks.

Anet A8 - Fan Mod - Laser Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3970455.

Completely redrawn in SketchUp
.skp file attached 

------

Feel free to print or remix and don't forget to post it.

If you find it useful you can send tip or [buy me a coffe](https://www.paypal.me/tockainfo). Thanks.

Extruder Spinner Remix of Remix of Remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4014643.

Just a simple remix

------

Feel free to print or remix and don't forget to post it.

If you find it useful you can send tip or [buy me a coffe](https://www.paypal.me/tockainfo). Thanks.

7 Segment Divider - Altoids Tin - Daily Pill Container- remix /w numbers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3686774.

This is a remix of [Anet A8 Capacitive probe LJC18A3-H-Z/BX right side by lipov3cz3k](https://www.thingiverse.com/thing:2739654)
Original design [Anet A8 Capacitive probe LJC18A3-H-Z/BX on Marlin 1.1.9
by fratton ](https://www.thingiverse.com/thing:2739654)

Mods:
--------
-     I have added more clearance to sensor hole because i could not mount sensor with original nuts (see pic)

Wiring and Marlin configuration
----------
-     For wiring see [Diagram for capacitive sensor with optocoupler module by Didakis](https://www.thingiverse.com/thing:2906283)
-     For Marlin configuration see original [thing](https://www.thingiverse.com/thing:2739654) and [Marlin docs](http://marlinfw.org/docs/configuration/probes.html#probe-configuration)

------
Feel free to print or remix and don't forget to post it.

If you find it useful you can send tip or [buy me a coffe](https://www.paypal.me/tockainfo). Thanks.

Anet A8 - LJC18A3-H-Z/BX right side mount 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3885361.

This is a remix of led strip mount originally designed by [ValorReplicas](https://www.thingiverse.com/thing:3546167).

Mods:
---------

- This version is 150mm in length and for a 8.2mm led strip in width.

------
Feel free to print or remix and don't forget to post it.

If you find it useful you can send tip or [buy me a coffe](https://www.paypal.me/tockainfo). Thanks.

LED Strip Light Holder for 3D Printer Enclosure  - 15cm

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3437231.

See original thing description for more info, just a remix for shelf mount w/ 2x screw

------
Feel free to print or remix and don't forget to post it.

If you find it useful you can send tip or [buy me a coffe](https://www.paypal.me/tockainfo). Thanks.

Thermometer display holder w/ screw holes

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4148024.

By [camil_o](https://www.thingiverse.com/thing:3285555) idea, completely redrawn to fit 2x Mosfet + GeeeTech GT2560 REV A board

------

If you find it useful you can send tip or [buy me a coffe](https://www.paypal.me/tockainfo). Thanks.

Anet E12/E10 - GT2560 + 2x Mosfet

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3632524.

Removed puzzle part and added third hole.

Remix from [35mm DIN Rail by Atomist](https://www.thingiverse.com/thing:700461)
Original [35mm DIN Rail - Parametric by cgapeart](https://www.thingiverse.com/thing:293558)

------
Feel free to print or remix and don't forget to post it.

If you find it useful you can send tip or [buy me a coffe](https://www.paypal.me/tockainfo). Thanks.

35mm DIN Rail - no puzzle attachment

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4098585.

Just removed text, all credits go to [cypsoisse](https://www.thingiverse.com/cypsoisse).


Support mount for a second Mosfet into Anet E10/E12 - no text

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4608344.

30 and 60 degree honeycomb modifier for [Boling P1 Vlogger light Modifier](https://www.thingiverse.com/thing:3657303) by [steve220](https://www.thingiverse.com/steve220)

------

Feel free to print or remix and don't forget to post it.

If you find it useful you can send tip or [buy me a coffe](https://www.paypal.me/tockainfo). Thanks.

Boling P1 Vlogger light Modifier - honeycomb 30/60 degree

I make Silicone stuff with 3D printed molds

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

gregorb

Achievements

Seedling

Explorer