tracking pixel
G

Hygrometer/thermometer housing/stand

by
glabifrons
Follow
Follow
Remix Model
Hygrometer/thermometer housing/stand 3d model
Hygrometer/thermometer housing/stand 3d model
2D
3D
Makes
Be the first to upload a Make
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4917258.

These hygrometer/thermometers are super cheap on Amazon. I wanted to be able to view one on the outside windowsill from inside the house, but I couldn't get the angle the way I wanted. I designed this to solve that problem.

It's ventilated to ensure an accurate reading, and holds the LCD at a 45 degree angle.

If your printer has decent part cooling and can bridge well, you won't need supports. If it doesn't, the support should be minimal with only a single support line under the top of the main opening. Hint: set your "Support Overhang Angle" to over 45 degrees. You may need to use support blockers for the side openings, but they should print well with a low layer height. I used 0.16mm for mine and they came out great with no supports at all.

These are the ones I bought. Many vendors sell them. They also come in centigrade/Celsius for those of you not using barbarian units. :^) https://www.amazon.com/gp/product/B08PVLF8LD


0 Likes5 DownloadsOctober 23, 2021


0 Likes5 DownloadsOctober 23, 2021
This model is restricted by licensing terms.