A creative hanging planter for your home or garden.
What you need:
- The 3d printed thing
- Yarn with about 3mm in diameter (can be flax, hemp, whatever)
The assembly instructions are in the images.
Size: 90 × 80 × 170 mm
Print settings Required build volume: 90 x 90 x 180 mm Material usage: 110g Print time: 10h
Material: PLA Print direction: stl is rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm – 0.28 mm Outer walls: 3 Infill: 15% Build plate adhesion type: brim
Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.