Box / Travel bag

A little box intended for travel but also useful for organizing stuff at home. I use it as a travel toiletry bag.

Included versions:

• Body_big: The Body with inner dimensions of 200mm length x 90 mm diameter
• Lid_big_default: The Lid for the big body
• Lid_big_more_clearance: The lid for the big body with a little more clearance for messy printers
• Body_small: The Body with inner dimensions of 200mm length x 50 mm diameter
• Lid_small_default: The Lid for the small body
• Lid_big_more_clearance: The lid for the small body with a little more clearance for messy printers

Instructions

1. Print both parts
2. Bend the lid until it fits the diameter of the body. Don’t be shy, the living hinge can take it!
3. Insert the lid from the back
4. Enjoy!

Print settings Required build volume: 220 x 220 x 120 mm Material usage: 180g big; 100g small Print time:18h big; 11h small

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none