 Kit card model of the TIE Dagger as seen in Star Wars: Episode IX The Rise of Skywalker. 

May the Fourth Be With You! 

Introducing a kit card version of the TIE/dg Starfighter (also known as the TIE Dagger, or the Sith TIE Figher.

- Individual parts are included so you can print the model without the sprue to save plastic if desired.A pdf of instructions is included to print and hand out with the cards if they are given as gifts or stocking stuffers.
- A “booklet” version of the instructions is also included to print double-sided (flipping on the long edge), fold in half and then staple together for easier gifting.
- Good bed adhesion is a must for the details to print properly.  Prints in the photos were printed on the Prusa MK3s+.
- Model has small holes at the top of the inner wings for hanging if desired.

TIE/dg Starfighter (TIE Dagger) (Sith TIE Figher) Kit Card

TIE Dagger Kit_Card.stl

If you like to share the print be sure to tag us [@kitkard3](https://www.instagram.com/kitkard3/?next=%2F)
Let's continue with rockets ! Who doesn't like the starship, the biggest rocket currently built by spaceX, I know I do !
Have fun assembling this replica starship with its booster.
It was optimized to not waste filament as the two colors are printed separately.
It should be pretty easy to assemble, you also have to sets of flaps to put them into the two possible configuration.
It mostly doesn't need glue but if you need some CA glue is the best solution.

Commercial license and more parts available on thangs

Starship rocket Kit card

Starship v11.3mf

Projectvideo:
https://www.youtube.com/watch?v=6RgBXBwwXBg

1:64 Print-in-place kit card.
Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version

The Jeep Kit Card:
https://than.gs/m/1051403
The Trailer:
https://than.gs/m/1051404
The Gun:
https://than.gs/m/1064529

Subscribe or follow me on:
Instagram: www.instagram.com/agepbiz
YouTube: www.youtube.com/user/agepbiz
Twitter: www.twitter.com/agepbiz

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

Printsettings:
No support
No raft
0,16mm layer height

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Jeep Kit Card

jeep_kit_card.stl

This model was [featured on the 3D Printing Nerd!](https://www.youtube.com/watch?v=XasxSY-Zbnc)

Be sure and Check out this awesome [video by 3D Chill with super clear assembly instructions!](https://www.youtube.com/watch?v=o4vy2UAYu1s&feature=youtu.be)

Inspired by benzz88's millennium falcon kit card, but more roughly to scale with the x-wing, y-wing and tie fighter models we've been collecting at the office.  

This was designed to snap together when printed on my homemade hypercube300 printer which apparently overextruded quite a bit, so you may have to adjust the holes, or use a little glue depending on how dialed in your printer is. 

**Print Settings**
Printer: Hypercube300

Rafts: No

Supports: No

Resolution: 0.1

Infill: 20%

Filament: Hatchbox PLA Gray 
 

**Notes:**
I printed mine low and slow to get the most detail.

Speed: 25mm/s
Temp: 195C
Layer Height: 0.1mm
Heated Bed: 60C
Filament: Hatchbox PLA Cool Gray

**Post-Printing**
There is a lot of surface area in contact with the bed, so remove carefully if you want to keep the card intact for gifting to others. An assembly instruction pdf is included to help with putting it all together.

Printed card is 180mm X 170mm to fit on 200mm X 200mm printers.
Assembled Model is roughly 120mm X 85mm.

Star Wars Millennium Falcon Kit Card by Fixumdude

Millennium Falcon Kit Card by Fixumdude

Kit Cards

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

eduncan911

Achievements

Novice Maker

Trailblazer

Kit Cards

TIE/dg Starfighter (TIE Dagger) (Sith TIE Figher) Kit Card

Starship rocket Kit card

Jeep Kit Card

Star Wars Millennium Falcon Kit Card by Fixumdude