This is my "to print someday" generic list.

WAAALL-E! The kit is roughly 10.5 inches (27cm) tall and 9 inch (23cm) wide.
___
Want your print to look just like ours? Shop the filament we used on the [Polymaker Website](https://shop.polymaker.com/THEKITKILN)

[Matte PLA Colors Used:](https://shop.polymaker.com/THEKITKILN?q=panchroma-matte)
- Sunshine Yellow
- Ash Grey
- Fossil Grey
- Cotton White
- Lava Red
- Pastel Banana

Purchases made through these links help support The Kit Kiln and future designs.
___
As with all of our models, this prints with **no supports**, assembles with **no glue**, and **doesn't require a multi-material 3D printer**!  Assembly instructions are included in the download with the files, and the print settings are listed in the photos above.
___
Come join our growing [discord community](https://discord.gg/vMKRxGFbwg) to engage with other makers, give feedback, and make requests for future models! 

WALL-E Kit | No Supports, No AMS, No Glue

Plate 7 - Dark Gray or Black.stl

Plate 1 - Yellow.STL

Wall-E 3MF (For Bambu Printers).3mf

Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership.

**Membership: [Exclusive models + Commercial License](https://than.gs/u/5447?plans=true)**

---

**Flowalistik Studio**
Discover our collection of functional and minimal interior design objects. 
**Explore the full collection: [Flowalistik Studio](https://than.gs/c/140740)**

---

**Lampe (2025 Edition)**

After releasing the original Lampe design in 2016, I'm back with a new edition that improves all aspects of it.

**Product information**
- Model dimensions: 215x210x100mm (assembled)
- Compatible with most lightbulb sockets (E14, E26, E27) and the Bambu Lab LED Lamp Kit 001 (with the E27 socket adapter included in this project)
- Print farm optimized: Perfect for selling. Prints with 0.8mm nozzle without quality loss. No supports needed
- Scaling: Do not scale the model since it's designed to fit standard E14, E26 and E27 lightbulb sockets
- Supports: No supports are needed

---

**3D printing settings**

Lamp base
- Shell: 1.6mm
- Infill: 15%

Lamp shade
- Vase mode*
- Fuzzy Skin: Enabled

*If the lamp shade is thin and deformed when printed with Vase mode, increase line width (a 0.8mm nozzle can extrude as wide as 1.6mm) or print in standard mode with 2 perimeters.

---

**Recommended 3D printers + materials**

Find the 3D printers, filaments and non-3D printed objects I recommend here: [Recommended 3D printers + materials ](https://linktr.ee/flowalistik)

---

Flowalistik STL files are strictly for personal use. Unauthorized resale of these digital files is illegal and subject to legal action. Respecting this copyright policy protects intellectual property and supports the creators and the integrity of the 3D printing community.

Lampe (2025) - Table Lamp

Lampe 2025 - Flowalistik Studio.3mf

Let the kitty hug your drink! This is mostly print-in-place, self-adjusting coaster,  that needs **NO supports**. 
[**CHECK QUICK DEMO VIDEO** ](https://youtu.be/SgHZKJepiLg)
**”Mostly” because mechanism and body are Print in place**, the only printed separately part is the round pad, which you need just put on top of the cat body. 

Clearance between moving parts is very big, so every printer should print this design without any problem.

**The Cat coaster automatically adjusts to the size of the object**, it can grip both a large mug and a standard aluminum can.

**Follow us** here on [Thangs]( https://thangs.com/designer/KrakDrag) and on [Instagram](https://www.instagram.com/krakdrag3d/) to stay updated on upcoming designs! 

Happy printing and share your new coaster!

**3D Printing settings:**

- No Supports
- Moslty print-in-place (pad is printed separetely)
- 4-3 walls (0.4-0.6[mm] nozzle) 
- 50[%] infill (More material in cat paws = better mechanism retraction)
- For using with hot drinks I suggest use additional thin cork pad or print “pad” file with a heat resistance material.

Cute Cat Mug Hugger: Self-Adjusting Coaster

STL_articulated_cat_coaster_main.STL

Make sure you print this upright!

A solution to keep your cables on the edge of your desk for easy access while also being able to easily swap them around.

The revolving chamber has gooves for your fingernail to make it easier to spin. The first few spins will take a little force until the layer lines detach and smooth out.

It's designed to grab onto the end of any cable and hold it at an angle above your desk surface so you can easily grab and pull on it.

Desk Edge Cable Holder (Print upright, no supports)

1 Cable Side Holder.stl

Build one of the most iconic vehicles in space exploration with this Lunar Lander kit! The kit is roughly 9 inches (23 cm) tall.
___
Want your print to look just like ours? Shop the filament we used on the [Polymaker Website](https://shop.polymaker.com/THEKITKILN)

[Matte PLA Colors Used:](https://shop.polymaker.com/THEKITKILN?q=panchroma-matte)
- Fossil Grey
- Charcoal Black
- Cotton White
- Lava Red
- Sapphire Blue

[Silk PLA Colors Used:](https://shop.polymaker.com/THEKITKILN?q=panchroma-silk)
- Gold

Purchases made through these links help support The Kit Kiln and future designs.
___
As with all of our models, this prints with **no supports**, assembles with **no glue**, and **doesn't require a multi-material 3D printer**!  Assembly instructions are included in the download with the files, and the print settings are listed in the photos above.
___
Come join our growing [discord community](https://discord.gg/vMKRxGFbwg) to engage with other makers, give feedback, and make requests for future models! 

Lunar Lander - FREE Spacecraft Kit | No Supports, No AMS, No Glue

Plate 11 - Fossil Gray.stl

Lunar Lander 3MF (For Bambu Printers).3mf

**An elegant, robust and reusable notebook with a pen compartment.**
Once you run out of blank pages you can just switch the paper out and keep the used ones stored with another rubber band. 

Single and multi-color printing models are included as STL and 3MF! They work with all current and usual multi color setups.
depending on your paper weight up to about 20 papers do fine – that will then be 80 pages.
The pen compartment is 10 mm in diameter, but it fits larger pens, too. Since the covers hold the pen in place, you can even use ones with a clip! 

**Versions included**
- For DIN A4 Paper – DIN A5 folded in Size
- For US Letter sized paper

**What you need**
- The printed parts
- Two rubber bands – regular household ones
- Regular copy paper

**Instructions** (Go along with the images)
- Choose your version
- Choose your clip: The clip should fit into the cover with a little friction. Go for the clip_default first. If it is too tight use clip_more_clearance. If it is too loose use clip_bigger.
- Print two of the covers, the back and four clips
- Fold the paper in half (Tip: by folding them one by one the result will be slower but more precise in alignment).
- Assembly the notebook by inserting the clips and pushing them into the cut outs according to the images provided.
- Bind the pages with the rubber band.
- Insert the other rubber at the center of the back. A screwdriver or other not-too-pointy object helps here.
- Enjoy!

This is the V2, the V1 is also included as a zip

**Print settings**
Required build volume: DINA4 220 x 220 mm, US Letter 230 x 230 mm
Material usage: 220g

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Infill: 15%
Build plate adhesion type: none
Please don’t use any filament with particles (like wood filament) for the clips since those are usually more brittle.

Notebook with pencil case

Back_USLetter_paper.stl

DINA4_paper.3mf

USLetter_paper.3mf

**Beautiful and highly detailed head of a T-rex that can be wall mounted. Looks great as decoration, but it will also hold your headphones and controllers.**

[If you like this design, check out the whole collection of Wall Mounted Heads here!](https://thangs.com/designer/IK3D/collection/Wall%20Mounted%20Heads-370456)

This is a super easy prints, it does not need any support at all!

**Includes:**

-T-rex with arms 100% scale
-T-rex no arms 100% scale
-T-rex head 75% scale
-Right and left arms
-A version to fit Xbox One controllers

Get creative with the colors you use, or you can even paint it but don't forget to upload your makes :) I would love to see them and it would help me a lot!!

I have used Esun magic red-blue filament and it looks amazing as you can see in the pictures.

**"All of my models are for personal use only, unless you are an active subscriber with a commercial license."**

**3D PRINTING SETTINGS:**

-2 Walls, 6-10% rectilinear infill

-No supports needed!

-Looks really good with double or triple color filaments

----------------------------------------------------------

**"All my models are for personal use only, unless you're an active subscriber with a commercial license. Check out all my links here: ➡️ [linktr.ee/ik3d](linktr.ee/ik3d)"**

T-Rex Dinosaur Head Wall Mount Hanger / No Supports 

Trex head no arms 100%.stl

Trex With Arms For Xbox Controller.stl

Interested to Print

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

eduncan911

Achievements

Novice Maker

Trailblazer