3D Print Files in STL format of Darth Vader's iconic helmet from Revenge of the Sith

The regular helmet also includes 2 version of the faceplates: one for vacuum formed eye lenses and one for flat lenses. For a proper Revenge of the Sith Vader you'll want to use the flat lenses. Use the lens cutout template in conjunction with the flat lens faceplate and ridge system to hold the lenses in place easily!

Some additional materials will be necessary to complete the helmet. You'll need 3/4" width elastic bands to connect the face and neck together - use the modeled ridges as guides! You'll also need two 1.25" diameter magnets to connect the dome to the top of the head. The mesh behind the top respirator and ventilator is also included as a file but should be some kind of black fabric for total accuracy.

All the vents on the main faceplate are numbered and feature flat bottoms to easily fit on a printer build plate (it does mean they stick out a little on the inside though). These are often removed in favor of actual vents and fans though.

As with the other helmet projects, the files include:
-Bambu Studio Project and GCODE files
-Assembled version
-Filled and solid version for mini printing
-Pre-Separated versions
-Pre-cut parts for smaller printers

Default scaled to fit 24.5" circumference heads. I would not recommend altering the scale very much since the magnets holes require a specific size to work properly.

Revenge of the Sith Darth Vader Helmet - 3D Print Files

RotS Darth Vader Helmet - Assembled.stl

3D Print Files in STL format of Darth Vader's iconic armor from Revenge of the Sith. 

Included in the armor is:
- Chest
- Shoulders x2
- Chain
- Print-In-Place Chain
- Chain Pins x2
- Codpiece (technically should be foam for 501st approval but would be a good casual option)
- Shins x2
- Belt Boxes (25 Parts)
- Chest Box ( 12 Parts)

Pre-cut parts for smaller printers are also included! The chest and belt boxes have all been hollowed for electronics. Since some of the parts are constantly lit the buttons are separated and pretty thin - I would recommend printing these in transparent resin. Each separated button is marked with it's color as well.

Revenge of the Sith Darth Vader Armor - 3D Print Files

Chest.stl

3D Print Files in STL format of Darth Vader's Samurai inspired helmet!

The helmet features:
- Assembled and Solid Version
- Vacuum forming lens buck and flat visor template
- Bambu Studio Project and GCODE files
- Pre-Separated Version
- Alternate faceplates for your preferred lens option
- Alternate domes with and without the modeled "strapping"
- Pre-cut parts for smaller printers
- Magnetically attached dome for easy attachment
- Has recessions for 3/4" elastic bands to connect the neck seals

Default scaled to fit up to a 24.5" circumference head.

You have 2 options for the lenses: vacuum formed or flat face shield. Vacuum formed is traditionally more accurate for Vader but the flat face shield will be much easier. You can use the template to cut out the shape you need in a hobart face shield then slot it in the pre-modeled ridge behind the eye sockets.

Samurai Darth Vader Helmet - 3D Print Files

Darth Vader Samurai Helmet - Assembled.stl

3D Print Files in STL format of the Samurai Darth Vader armor.

Features of the armor:
- Includes 2 versions of the Hips and Shoulders: Modeled and Weaved. Modeled parts include the armor plate connecting string and allows you to connect them yourself; Weaved parts have holes for you to weave the armor plates together in a more traditional way.
- Includes files for the Katana! It uses .25" diameter pins to hold the blade in place. We've also included a DXF file for plasma cutting your own blade out of metal
- Default scaled to about a 6' tall 200lb person
- Includes pre-cut parts for smaller printers
- The chest box has pre-separated details that can either be resin printed or replaced with colored cording
- Bambu Studio project and GCODE files at the default scale. It uses 10mm x 3mm metal pins to reinforce the seams.


Samurai Darth Vader Armor - 3D Print Files

Chest Plate.stl

This stand is modular, you can make it hold two to as many lightsabers as you like. You just need a top and bottom, add middle sections if you want it to hold more than two. Each section is bolted to each other using M3 x 16mm screws and nuts, they could be glued together too. There is a flat section all the way around the inside for mounting of sticky backed LED strip lighting. I used some 24v Blue LED's I had left over from a printer build. They no longer make that type, I would suggest the newer type [24V COB LED's](https://amzn.to/3LCMRgP)(aff.) I used on my vertical display, they are much better. 

There are two versions of the hook that supports the lightsaber. One version is for [M3 heatset nuts](https://amzn.to/3DMDFT1)(aff), and the other is for a M3 trapped nut. The hooks can also be glued on too. The adjustably of the screwed on version is and advantage so you can adjust for different diameter hilts. You will need M3 x 10mm long screws for attaching the arms.

There are two wall mounting holes on each of the end pieces, I just used drywall screws. There are middle sections with and without mounting holes. If you make a really tall version, you may consider some mounting holes in the middle to keep it tight to the wall so light isn't allowed to escape.

The bottom mount has a hole for a [panel mount power plug](https://amzn.to/3VYRdRY)(aff). Just solder a short wire from the plug to the LED strip, remembering the shorter terminal on the plug is positive. If you don't have a power supply,  you will need a [3amp power supply](https://amzn.to/3LNJjZ7) for the entire length of the LED strip. For smaller displays a [1 amp power supply](https://amzn.to/47HIGZM) will work. That's what I used. 


Modular Lightsaber Wall Display

WALL MOUNT-BOTTOM.stl

Join the rebellion with this X-Wing kit! The kit is roughly 10 inches (25cm) long with an 8 inch (20cm) wingspan.
___
Want your print to look just like ours? Shop the filament we used on the [Polymaker Website](https://shop.polymaker.com/THEKITKILN)

[Matte PLA Colors Used:](https://shop.polymaker.com/THEKITKILN?q=panchroma-matte)
- Muted White
- Ash Grey
- Army Red
- Cotton White
- Army Blue

Purchases made through these links help support The Kit Kiln and future designs.
___
As with all of our models, this prints with **no supports**, assembles with **no glue**, and **doesn't require a multi-material 3D printer**!  Assembly instructions are included in the download with the files, and the print settings are listed in the photos above.
___
Come join our growing [discord community](https://discord.gg/vMKRxGFbwg) to engage with other makers, give feedback, and make requests for future models! 

X-Wing - Star Wars Kit | No Supports, No AMS, No Glue

X-Wing 3MF (For Bambu Printers).3mf

Army Blue.stl

Army Red.stl

Ash Grey.stl

Cotton White.stl

Muted White (1).stl

Muted White (2).stl

Muted White (3).stl

Unleash your Star Wars fandom this holiday season with our spectacular 3D model of a Star Wars Christmas Ornaments. 
This 3D design is ideal for Star Wars enthusiasts looking to infuse their holiday decorations with a touch of intergalactic charm. 
The detailed 3D model seamlessly blends the magic of Christmas with elements of the culturally iconic Star Wars universe, creating a unique and eye-catching ornament for your Christmas tree. 
Whether you are a fellow design enthusiast or just a Star Wars fan seeking festive furnishings, you'll surely be captivated by the stunning visuals and remarkable precision captured in this decorative 3D Star Wars Christmas Ornament model.

Star Wars Christmas Ornaments

star-wars-christmas-ornament_8-14.stl

This is a cute, chibi-scale model of the Tie Fighter from Star Wars. It is part of my **Tiny Turbos collection**, a series of themed, miniature vehicles from popular IPs such as Star Wars and DC Comics. These models are designed to print quickly, assemble easily, and display nicely with each other as you mix and match your favorite vehicles to display on your shelf.

**Go check out the companion to this model, the X-Wing:**
[https://than.gs/m/1145923](https://than.gs/m/1145923)

**Printing & Assembly**

This model prints in 6 parts that connect using 1 connector. You can use glue for a strong connection. 

There are also included .3mf files for printing this design in multicolor - AMS required.

Be sure to follow me on [Thangs](https://thangs.com/designer/alext1) or on [Twitter](https://x.com/alext_3d) to be notified as I release free, high quality designs like this every week.


Tie Fighter - Tiny Turbos - Star Wars

tie-front.stl

tie-fighter-bambu-multicolor.3mf

tie-fighter-generic-multicolor.3mf

Don't let your remotes get lost in the couch cushions anymore! Give them a holder worthy of a galaxy far, far away...
Add a Galactic Touch of Wonder to Your Living Room with This Star Wars AT-AT Remote Holder!

This unique holder features a fallen AT-AT in the snow, capturing an iconic scene from the Star Wars universe.

This holder is available in two sizes to fit all your needs. You can also choose between two  versions single color or multicolor

Whether you're an avid collector or simply a fan of the saga, this remote holder is both functional and decorative. It keeps your remotes organized while adding a touch of sci-fi to your everyday life.

Original design : https://www.thingiverse.com/thing:5328845
Viral video here : https://www.instagram.com/reel/C-0PLm3tZp4/

Fallen AT-AT Remote Holder

AtAt_Remote_Holder.3mf

AtAt_Remote_Holder_SingleColor27cm.3mf

AtAt_Remote_Holder_SingleColor30cm.3mf

AtAt_Remote_Holder-Multicolor27cm.3mf

AtAt_Remote_Holder-Multicolor30cm.3mf

Star Wars

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

ecbonilha

Achievements

Seedling

Explorer