A fearsome and noble weapon inspired by Norse warriors and Viking chieftains. This long-handled axe features a stylized bearded blade with engraved knotwork and a reinforced shaft for two-handed use. Ideal for Viking cosplay, LARP, or historical/fantasy display.

UPD.1 - Added Precut, And Simple Versions

📏 Measuring Instructions To scale the axe correctly for props or cosplay:

Handle Length: Measure from hand to shoulder for a realistic two-handed grip (typically 80–100 cm)

Grip Diameter: Measure your palm's grip width for comfortable handling (around 3–4 cm)

Blade Size: Scale based on overall height, or use reference: blade length ~20–25 cm

Adjust in your slicer to match personal proportions or scale down for tabletop or wall décor.

💡 Use a hairdryer or heat gun (on low) to fine-tune handle curvature or blade fitting after printing if necessary.

🖨️ Printing Instructions Recommended Settings:

Layer Height: 0.2 mm

Infill: 20–30%

Supports: Yes (especially under blade curve and handle detail)

Material: PLA or PETG; wood filament for more realism

For large-scale prints, separate into blade and handle sections and connect using pegs or rods.

🎨 Finishing Tips Blade: Base coat with steel silver or weathered iron, then dry-brush with black or rust wash for aging

Handle: Use wood grain paints or wrap with leather/synthetic cord for realism

Details: Highlight knotwork or runes with gold, bronze, or bone-white

Sealant: Satin or matte clear coat

⚙️ Model Type Recommendations Viking cosplay prop

Norse wall display piece

LARP weapon (with post-processing)

Historical weapon replica

Fantasy or RPG character gear