With a little bit of a 'verse mashup, I present to you Samurai Spider-Man. Having multiple shades of blue will help here - but this print allows you to be a bit creative and flexible with your colour choices!
The attached 3MF will have the necessary colour swaps already loaded in for those on Bambu printers. If not, please use the STL and the follow the instructions below:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.4
- PLA+ Overture Dark Blue Transmission Distance: 4
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA BambuLab Basic Red Transmission Distance: 5
- PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
- Start with Black
- At layer #6 (0.6mm) swap to Dark Blue
- At layer #9 (0.84mm) swap to Teal
- At layer #15 (1.32mm) swap to Black
- At layer #16 (1.4mm) swap to Red
- At layer #20 (1.72mm) swap to Jade White for the rest.
If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!
Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.
If a Thangs Membership is not your thing, I also have a Patreon that gives you the same perks!