Enlist in the Dark Side - HueForge Print

Do you want to expand the ranks of the Imperial Army? Well, now you have a great poster to help your cause! 3D printed, no less 😄

Pretty simple print, 4 colours and a lot of fear, hate, anger and suffering... NOT. The 3MF will have all you need if you're using Bambu Studio, and the STL is provided for those of you who want to tweak the settings yourself. Instructions are below!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA+ eSun Grey Transmission Distance: 1.4
• PLA BambuLab Basic Jade White Transmission Distance: 5
• PLA BambuLab Basic Red Transmission Distance: 5

Swap Instructions:

• Start with Black
• At 0.68mm swap to Grey
• At 1.08mm swap to Jade White
• At 1.48mm swap to Red for the rest.