Another book cover replica! Enjoy! 3MF included for Bambu Studio users, STL available for all other users as per usual!
Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm The Max Depth is 2mm and the Actual Depth is 1.8mm
Filaments Used:
- PLA Kingroon Transmission Distance: 0.4
- PLA Flashforge Burnt Titanium Transmission Distance: 4
- PLA TECOR Light Blue Transmission Distance: 3.5
- PLA BambuLab Tough Vermilion Red Transmission Distance: 3
- PLA eSUn Cool White Transmission Distance: 2.7 This print uses 5 unique filaments
Swap Instructions:
- Start with Black
- At 0.52mm swap to Burnt Titanium
- At 0.88mm swap to Light Blue
- At 1.24mm swap to Vermilion Red
- At 1.6mm swap to Cool White for the rest.
Happy Printing!
Categories:
0 Likes2 DownloadsJuly 23, 2024