Multiboard-based organization and tools. Functional prints only. Includes Multi-connect and Gridfinity options.

Ikea's Uppdatera line (2024-25) has a bin style with side handle cutouts and a slightly sloped down front in two sizes. They nest quite nicely, are super cheap, and are a great quick option for organizing all manner of things. I use then for organizing printing project parts in different materials or storing Multiboard snaps and connectors.

These brackets fit the small bins versions (805.040.49). The file includes a pair with Multipoint and another using the beefier MultiConnect - [Flush](https://www.printables.com/model/1160115-flush-multiconnect-generic-connector-for-multiboar/files) (recommended) or [Raised](https://www.printables.com/model/1074671-raised-multiconnect-generic-connector-for-multiboa).

I made these to be able to allow bins it to be quickly set and removed as needed (steps 1 & 2 in the pictures), but also mount a bin securely (optional step 3). This allows one to be set and additional bins to be nested in a stack using the first as a base for them. Empty, I've stacked them six high with no concern using the PLA+ settings provided with 3 wall loops.

Uppdatera Multiboard Mounting Brackets

Uppdatera Multiboard Mounting Brackets v2.3mf

I made this to help register and more easily start threaded Multipoint pieces without damaging the slot for reuse or removal. Keeping the part head parallel to the surface takes a lot of the frustration out of the process and is much easier with this. 

**There are two versions - Basic and Winged**. 

The models here is sized for use with a [U.S. Nickel coin](https://en.wikipedia.org/wiki/Nickel_(United_States_coin)).
Once printed, set the tool flush side up on a flat, stable surface and push the coin through the wider slot until it is fully seated and peaking out of the recessed side slot underneath. I use a pair of non-marring slip-joint pliers sometimes, but tap or two  from a rubber mallet would work. It's meant to be a tight fit and resist the coin pushing out of the tool when starting the threads. When fully seated, a MultiPoint head piece will fit snugly and register on the coin edge flush.

For storage, included are two "mounting spots"; one a flush screw and the other raised snap piece.

In practice, I find the winged option to be my general go-to, but the basic does come in clutch for crowded spots. When starting Multipoint small screws especially, gripping from and using the "back" half of the coin instead of the tool body you may find to be easier to control threaded piece into the slot. That same side back be flipped around and generally works a treat for Multiconnect and Multipoint parts tightening and removing in general.

Multiboard Nickel Coin Tool

Multiboard Coin Tool v1.3mf

Default size of magnets used with Multiboard is 10x2mm.
I adjusted this to accept 10x3mm magnets, which are much stronger comparatively.

Magnetic Mid Thread 10x3

Magnetic Mid Thread.stl

Multiboard and Multiconnect Organization

Uppdatera Small Bin Insert

Uppdatera Small Bin Inserts.3mf

Bernzomatic Detail Torch Multiboard Holder

Bernzomatic Detail Torch Multiboard Holder.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

craftingsawdust

Achievements

Voyager

Seedling

Debutant

Multiboard and Multiconnect Organization

Uppdatera Multiboard Mounting Brackets

Multiboard Nickel Coin Tool

Magnetic Mid Thread 10x3