tracking pixel
Bjørn E

PyCom FiPy Case

by
beikeland
Follow
Follow
Remix Model
PyCom FiPy Case 3d model
PyCom FiPy Case 3d model
2D
3D
Makes
Be the first to upload a Make
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3676941.

edit 20200817 added .f3d file as fusion liscensing seems to have borked the link

Needed slightly bigger case to fit the LTE antenna for the LoPy module, added a snap on lid like Adafruit tutorial, and a 2nd hole for another SMA pigtail.

Raised the standoffs to fit my smallest M3x6 screws and lowered the overall height. Happy coincidence there is room for a small-ish battery under the board now.

Hardware provided by Telenor Start IoT, so sharing .stl and complete (mostly parametric) Fusion 360 project to the community for free use. https://a360.co/2QUactY

Added several lids with varying clearance, default part is 0.15mm which makes a nice snap fit on my Up Mini 2, but others may need larger clearance to print successfully.

(May change after some more testing)

Link to Adafruit's tutorial for an explanation on how it was modeled: https://www.youtube.com/watch?v=VVmOtM60VWw

https://pycom.io/product/expansion-board-3-0/ https://pycom.io/product/lopy4/


0 Likes9 DownloadsOctober 30, 2021


0 Likes9 DownloadsOctober 30, 2021
This model is restricted by licensing terms.