Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers

ForgeCore

Remix Model

Social

Become a member

Makes

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - Fun set. As someone else mentioned side 1 and 8 don’t set all the way flat so the pieces see to tip over easily.

Printed without issue (Bambu A1) once I had the proper tree supports setup for the vertical log pieces. - 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - Amazing log that turns into a chessboard ! - 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - Logs 6 and 8 modified. If anyone is interested in the files, let me know and I can figure out the best way to share them. - 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - Printed on my MK4/MMU3. A fun print! I printed the log pieces horizontally with supports on the build plate only.

Assembly was easy. Like others have stated, log section 8 is very different from the other 7 pieces and it makes the board sit funny. The end caps are really snug but after working the edges of the caps/logs over with a file and a deburring tool it’s working well.

I would like an option to print the light colored squares all at once in the log sections using my MMU3 (or ams or whatever). It would look cleaner than glued in pieces.

Printed in IIIDMax PLA+ Brown, Coyote Brown, Vanilla Cream, Copper and Army Green and Eryone Matte Black Forest Green.

I didn’t realize that there was a version of the log ends that were already prepped for multicolor printing so I painted my ends in PrusaSlicer on my own and printed them in multicolor on my MMU3, they turned out great. - 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - Voilà - 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - A custom color request for a customer. I really enjoy the Mushroom colors and I think this was a great combo! All and all took about 12 hours across two P1Ps! - 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - Amazing Print. - 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - Printed okay. Tree trunks needed a lot of tuning for them to not fall over at 97%. Bed slingers are not the best for these kind of high prints. I printed the chess pieces with a 0.2mm nozzle for more detail. Came out great but needed some additional tuning. All with all really happy with the outcome. Amazing design! - 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - Another custom color picked chess set! I really enjoyed how the tricolor mushrooms play off each other! - 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - Printed with wood pla. 30% wood fibers, 70% pla - 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - Still grinding - 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - another order - 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - Hi, does anybody know why log 8 is higher than other? Qeen even can’t stand on this angel.. - 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - Worked well on my A1 mini -- Had to scale parts to 70% to fit on the smaller bed, except the end caps were printed at 71% or 72% scale, otherwise it was too tight a fit on my build. I printed the log pieces out horizontally with supports and had to use 0.5mm craft wire for stringing the hinges (ideally 0.8mm might be better). But all in all, very nice and it scaled well! - 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - I absolutely love the new updates! Thank you! - 3d model

Forest Chess Set - Log and Mushroom Chess Board - Acorn Checkers - May I please get the original file again? I got the new one and overwrote the original. I appreciate the new file but don’t like it as much as the original. The end caps don’t match up well, the bark doesn’t look as good, and the board doesn’t really lay that much flatter. The original is the one on the left in comparisons and the one where 8 is way too tall in the laying flat. The rest are the new one - 3d model

This model is restricted by licensing terms.

View license.

Don't have a 3D Printer? My models print great with These Printers (affiliate)

This design was made in collaboration with Gazzaladra

A Log that unrolls into a chess set? This log is a great decorative piece that doubles as a rolled-up chessboard. Remove both end caps to reveal the unique mushroom-themed chess pieces and wood-colored board. You can even use the end caps as coasters when you're playing your match.

The chess pieces are stored inside the chess board in two sets, colored to match the board.

Botany Test? The mushrooms and log are all photoscans of real plants! Below are the names of the plants so you can test your Botany skills

Log: Pine Tree Pawn: Penny Bun Rook: Shiitake Bishop: King Trumpet (yes, we made the King trumpet the bishop) Knight: Yellow Morel Queen: Fly Agaric King: Chanterelle

Board Assembly

UPDATES The board now prints in place!

Glue in 6 magnets in the holes in log part 1 and 8 - make sure to have them face the right direction (optional but recommended) -Screw on the end caps (labeled top and bottom)

There is an Assembly Required board that allows for the board to be printed piece by piece. Split the STL into objects

Left Click the Board, Right Click Find split, and select To Objects
Print standing upright with support, or flat on your build plate.
Assemble the board with segment 1 - 8
The hinges used 1.75 mm filament. Feed it through each adjoining segment
Glue in 6 magnets in the holes in log part 1 and 8 (pay attention to the polarity)

Print settings Material: PLA Print direction: stls are rotated correctly Nozzle size: 0,4 mm Line width: 0,4 mm Infill: 15%

Board Layer height 0,2 mm Support: One the log pieces 1-8 need support. Only “touching build plate”, 20 degree “threshold angle”. (in Cura the number is calcuted 90-20 – so put 70 in “Support overhang angle”)

Chess pieces Support: none Layer height 0,08 mm Build plate adhesion type: none

Filament Colors: Log Brown: OVV3D Black Walnut Wood PLA Tile Wood Color: OVV3D White Oak Top and Bottom Cap Accent Color: OVV3D Yellow Teak Wood Optional Green Color Seen on Video: Eryone Matte Olive Green

6x Magnets: Small 5 mm x 3 mm Magnets

Tags:

2.4K Likes2.7K DownloadsJune 6, 2024

This model is restricted by licensing terms.

View license.