I made a illuminated version of the [Access Granted Panel](https://than.gs/m/1542932), I released previously. There is both a multi-part version and a multi-color version, no parts require supports. The lenses are printed separately and are [glued](https://amzn.to/3WgGTVR) in, I printed them in semi-transparent PETG.

Soldering is not required as I utilized [8mm prewired 24v LEDs](https://dddprintingworld.etsy.com/listing/4507409023/leds-for-fallout-access-granted-control) and [COB LED Strip Lights]( https://amzn.to/4uNqtTp) with a 2x12 screw terminal [power distribution board.](https://amzn.to/3ZoWL9w) 

Note: I had to start suppling the LED's myself because the amazon seller quit offering them...

You only need to cut and strip the wires to length and terminate them into the board. Put the LED’s in the hole from the back side, aligning the flat on the LED. Then rotate the LED 180 degrees, to lock them in place.  I also used a [prewired jack](https://amzn.to/4rsDW14) to power the board. You will need [2mm x 6mm](https://amzn.to/4afc6yf) screws to secure the board. You can use a [24V 1w Power Supply]( https://amzn.to/4uI2xRd) to power them. 

Printed on a [Prusa XL](https://www.prusa3d.com/product/original-prusa-xl-assembled-5-toolhead-3d-printer/#a_aid=3DPrintingWorld)(aff.) with [Polymaker Metallic Pro PLA](https://us.polymaker.com/products/polylite-metallic-pla-pro)


Fallout Access Granted Illuminated Panel

AG-MC-LED-REF ONLY-NO PRINT.stl

**Channeled through an Aetherion Shard, the blade shimmers with cascading sapphire waves of pure focus.**
A masterwork energy saber, refined for clarity, precision, and the calm edge of dominion.
___
Want your print to look just like ours? Shop the filament we used on the [Polymaker Website](https://shop.polymaker.com/THEKITKILN)

[Matte PLA Colors Used:](https://shop.polymaker.com/THEKITKILN?q=panchroma-matte)

- Army Blue

- Fossil Grey

- Pastel Ice

- Sapphire Blue

Purchases made through these links help support The Loot Lab and future designs.
___
From forge to hand, no magic tools required — prints in single colors, support-free, and snaps together without glue.
Assembly scrolls are included in the download, with print settings revealed in the images above.
___
Seeking a guild of 3D printing adventurers? Join our growing [Discord tavern](https://discord.gg/vMKRxGFbwg) to trade ideas, share quests, and shape future loot!

Aetherion Veil

Army Blue.stl

**NOW FREE TO DOWNLOAD
Just dropped a brand new model from the NEW Lore & Decor series.

Say hello to the Rustic Hobbit Doorway, designed for desktops, bookshelves, or fantasy inspired displays.

Featuring layered wood textures, stone detailing, and a cozy lantern accent, this piece brings warm, magical vibes to any space. Whether you’re building a diorama, styling a book nook, or creating a tiny corner of the Shire, this one fits right in.

🛠️ Print-Ready STL

📚 Easy to scale & display

✅ Supports only needed for lanterns and door hinge.

✅ Wall lines: 2 | Nozzle: 0.4 mm | Infill: 10% | Pattern: Gyroid

✅ Filament used: Polymaker Panchroma Army Brown/ Ash Gray/ Forest Green/ Savannah Yellow; Polymaker Polylite Metallic Gold / Metallic Silver

🌿 Available now for Blue Flame Tier members

Includes full commercial rights + exclusive new drops each month

📅 Lore & Decor Premium Drop – June 2025

📩 Tag me in your prints—I’d love to feature your fire 🔥

Thanks for being here and supporting the builds.

Let me know if this is the kind of model you’d like to see more of, and what realm we should open next 🗝️

⚠️ Note: This is a multicolor model and, for the most part, not modular. It’s meant to be printed on multicolor setups or hand-painted for best results.

Looking ahead: This model will likely get an update in the future to incorporate lights into the lanterns—thinking something simple like small fairy lights. Let’s see how it goes 👀💡

— Mas Fuego 🔥

Hobbit Door - Lore and Decor - Mas Fuego 3D Productions

Hobbit Door - Lore and Decor - Mas Fuego 3D Productions - Door Frame.stl

**Make It 3D Printable!!** Thor's Stormbreaker needs no introduction. It's the focus of our epic two-part build series: [Building Stormbreaker: Part 1](https://www.youtube.com/watch?v=HxX75eYf598) and [BRING ME THANOS! Building Stormbreaker: Part 2](https://www.youtube.com/watch?v=449lCaylrIo).  Enjoy it now, reimagined as a fully built and tested FDM print!

Print Instructions
> - Print handle parts with higher wall loops (more than 5) with infill 25%
> - Print the axe with less strength, with 4 wall loops. 5% to 10% infill. 
> - Print all connecting pins with higher strength. More wall loops or 100% inill

Features
> - Modular Parts for painting or electroplating 😎

Attachments:
> - STL Files
> - CAD Assembly
> - Assembly video explainer

Filament Needed:
> - Dark Grey: 1375g
> - Light Grey: 2825g
> - Brown: 2000g
> - Cyan: 430g
> - **Total:** 6.630 kg

Stormbreaker (3D Printable)

Mid Segment.STL

This can be printed in Resin or FDM (Better on Resin). No supports needed. Current scale is what I believe to be close to showing accuracy, but scale as you please!  The "demascus" pattern may become more pronounced the large the model is scaled. If printing on FDM, I printed with the small button face on the build plate and it worked fine (Should already be oriented this way)!  For resin, you may know how to orient it better than I do!

**Here Are the Settings I Used to Print:**
Nozzle: I printed with 0.4 with no issues, although a smaller nozzle or smaller layer height would probably make it look better on FDM.
Infill/Perimeters: On resin I printed hollow, on FDM I printed with 10% infill.
Supports: None

**Post-Processing/Assembly:**
I tried a couple of different methods for post-processing between silver rub n buff, and different black and silver paint to try and achieve the steel look.  The best in my opinion was the Resin print, painted with black spray paint, then given a light coat of silver acrylic paint.

**Future Plans/Other Notes**
I would eventually like to design a more show-accurate version as far as the pattern goes, although I am pretty happy with this one.  I may also experiment with the pattern depth to make it still highly visible, but less "textured."  Let me know what you think of the current design!

Raw Beskar Ingot (Mandolorian)

Balrog and Gandalf Book Case Display

STL_Balrog  Gandalf Scence_Gandalf.stl

Bring the elegance of stained glass art and the spirit of "Firefly" into your home with this 3D printable Serenity Stained Glass Light Box! This stunning piece captures the iconic spaceship Serenity in a vibrant, light-catching design that will delight any Browncoat. Perfect for fans of the beloved series, this light box adds a unique touch to any room, creating a warm and nostalgic atmosphere.

**Features:**

- **Easy to Print:** Optimized for 3D printing, making it accessible for enthusiasts of all skill levels.
- **Beautiful Illumination:** When lit, the stained glass effect shines brightly, casting colorful patterns and adding a magical glow to your space.
- **Perfect Gift:** Ideal for any "Firefly" fan or as a unique decorative piece for your own collection.

The filaments I've used are a mix of **Bambu Lab, AzureFilm** and **Extrudr** filaments. The parts that resemble the stained glass are printed in **Bambu Lab PETG Translucent Blue, Translucent Gray, Extrudr PETG Transparent Blue** and **AzureFilm PETG Transparent Yellow**.

The front and back frame are both printed in **Bambu Lab Basic PETG Black**. All the other parts are all printed in **Bambu Lab Basic PLA**. The box, lid and led panel or led strip holder are printed in the color **black**, the diffuser is printed in the color **white**.

The box and the lid have little compartments where you can glue in magnets (width 6mm & height 3mm) but this is optional and not needed to keep the lid on the box.

**Print Settings**

_Stained glass pieces_

- 100% infill
- Top surface pattern: Octogram Spiral

_Front & Back Frame_

- Arachne wall generator or detect thin walls

_Backlight Led Panel Holder_

- Regular support on build plate only

_Backlight Led Strip Holder_

- Outer brim recommended

_Diffuser_

- 100% infill
- Outer brim recommended

_Box & Lid_

- Outer wall speed 90 for consistent surface finish
- Seam position: Back

For the light source I've used following Bambu Lab products

_EU Store_

- [Led panel](https://eu.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes)
- [Led strip](https://eu.store.bambulab.com/en-be/products/s-shape-led-strip-light-ws2812b-rgb)

_US Store_

- [Led panel](https://us.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes)
- [Led strip](https://us.store.bambulab.com/products/s-shape-led-strip-light-ws2812b-rgb)

_ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Companion subscription._

Firefly Serenity Stained Glass Light Box

Front Frame (PETG).stl

Discover the incredibly detailed 3D model of the iconic Invader Zim on thangs.com. 

Invador Zim

invador-zim.stl

My latest stained glass design depicts the TARDIS from the TV show "Doctor Who." The TARDIS (Time And Relative Dimension In Space) is the Doctor's time machine and spacecraft. It is famously disguised as a blue British police box, a common sight in Britain during the 1960s when the show first aired.

In this artwork, the TARDIS is set within a gothic-style archway, creating a fusion of classic and sci-fi elements. The central TARDIS design is rendered in shades of blue, with yellow-lit windows, and surrounded by geometric patterns in purple and blue. The background features a light purple color with subtle star-like patterns, evoking a celestial theme. The entire piece is framed with a black border, enhancing its appearance as a stained-glass window, reminiscent of those found in cathedrals, but with a distinctive "Doctor Who" twist.

The filaments I've used are a mix of **Bambu Lab** and **Extrudr** filaments. The parts that resemble the stained glass are printed in **Bambu Lab PETG Transparent, Translucent Purple, Translucent Brown** and **Extrudr PETG Transparent Blue**.

The front and back frame are both printed in **Bambu Lab Basic PETG Black**. All the other parts are all printed in **Bambu Lab Basic PLA**. The box, lid and led panel or led strip holder are printed in the color **black**, the diffuser is printed in the color **white**.

The box and the lid have little compartments where you can glue in magnets (width 6mm & height 3mm) but this is optional and not needed to keep the lid on the box.

**Print Settings**

_Stained glass pieces_

- 100% infill
- Top surface pattern: Octogram Spiral

_Front & Back Frame_

- Arachne wall generator or detect thin walls

_Backlight Led Panel Holder_

- Regular support on build plate only

_Backlight Led Strip Holder_

- Outer brim recommended

_Diffuser_

- 100% infill
- Outer brim recommended

_Box & Lid_

- Outer wall speed 90 for consistent surface finish
- Seam position: Back

For the light source I've used following Bambu Lab products

_EU Store_

- [Led panel](https://eu.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes)
- [Led strip](https://eu.store.bambulab.com/en-be/products/s-shape-led-strip-light-ws2812b-rgb)

_US Store_

- [Led panel](https://us.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes)
- [Led strip](https://us.store.bambulab.com/products/s-shape-led-strip-light-ws2812b-rgb)

_ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Companion subscription._

Doctor Who's TARDIS Stained Glass Light Box

Front Frame  (PETG).stl

**Shut Up and Take My Bottle Caps!**

Bottle Caps are the currency in the Capital Wasteland and beyond, now you can start making your own!  Prepare for the apocalypse and crash your local cap economy today!

Design features a distinctive "Bottle Cap" shape with the "Nuka - Cola" brand logo embossed into the top.  Ready to have some paint dripped into the logo easily! 

A "Display" version is included along with a "Display Stand".  This holds a cap at a 30° angle for display on a shelf (see photos below). The Display Cap has a cut out on the bottom for the stand to set into. 


Print a handful of these to go with your Fallout Vault Boy Cosplay or Halloween Costume!

*Design measures 38mm Wide and 7.5mm Tall.*

----------------------------------------------------------------

- **INCLUDED FILES:**
  - CAD STEP File to learn how I designed these.
  - Cap V2
  - Display Cap V1
  - Display Stand V1

---------------------------------------------------------------

- **PRINT PARAMETERS:** 
  - 3 Perimeters (Walls/Shells) Recommended
  - 20%+ Infill Recommended
  - MAXIMUM .4mm Nozzle (.2/.25mm recommended, the Logo is small!) or Resin Printing.

Mine were printed in Inland "Silk Red" PLA.

--------------------------------------------------------------

Want to Support what I do? Check out my social medias please!

**Link Tree:** http://www.HotRodHippie.com/links

**Want to Buy a Can Cup?** Check out our "Authorized Sellers" List here: https://www.hotrodhippie.com/resellers

--------------------------------------------------------------

**All of my Designs are covered by a Creative Commons Non-Commercial License.**  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. *By downloading this design you are agreeing to these terms.* Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

**PLEASE Credit any and all Remixes of my designs: MandicReally**

Nuka Cola Bottle Cap + Display Stand - Fallout Halloween Accessory

Nuka Cap V1.step

**Dread Pirate Roberts Collapsing Sword**
_Print-in-Place Version_ 

This version of the sword prints complete all as one part. 

The [Replaceable Blade Version]( https://than.gs/m/1039357) is available to my Thangs members.

**Printing**
Find detailed instructions on how to print collapsing swords on my [website.](https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords) If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. 

Printed on the [Mulcore](https://github.com/3dprintingworld/Mulcore) Core-XY 3D printer with [Polymaker Metallic Pro PLA](https://us.polymaker.com/products/polylite-metallic-pla-pro) 
___
**Support and Licensing**
If you would like to help support more free models please consider joining my Thangs [Membership.](https://than.gs/u/35786?plans=true) Get permission to sell physical copies of my models by joining [The Collapsing Arsenal]( https://than.gs/u/35786?plans=true)


Dread Pirate Roberts Collapsing Sword Print-in-Place

DPR-PNP.stl

Props

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

attackcat92

Achievements

Voyager

Novice Maker