9 of 30 3D printable lamp designs. It consists of five parts, a “shade” part should be printed in a vase mode (spiral contour in CURA). A “joint” part should be printed with supports. All the other parts are printed normally.

You will need 6 heat inserts (M4 × 5mm height x 6.5mm diameter), 2 M4 × 8mm bolts (or 10mm + a few washers), 2 M4 × 20mm bolts, 2 M4 × 30mm, an e27 plug.

Here is the link to a EU plug and a UK plug.

Archive includes 5 STL files.