When I try to follow the link to the Fusion 360 source, I keep getting sent to a page that says unauthorized access. Does anyone have any thoughts or suggestions? I have been able to access the game board files and the teleport tiles, but not this set.
스위치 게임 저장 컨테이너는 게임을 안전하게 보관하는 데 매우 유용합니다. 특히, 다양한 게임 카트리지를 정리하고 싶을 때 먹튀스나 상황을 방지할 수 있는 최적의 솔루션입니다. 깔끔하고 견고한 디자인 덕분에, 스위치 게임을 쉽게 관리할 수 있으며, 외출 시에도 편리하게 휴대할 수 있습니다.
Print with whatever you have on hand. Unless you're going to play in the car, with the car off, and in the summer sun, for >:30m then you might want to pick something other than PLA. ;)
One thing, there is a Tabletop marble course you can build with hexagons called „gravi trax“ that game is actually made my a big German game company.
I don’t know if they are looking for copies of the game but this comes pretty close,
The concept of rolling balls down shutes has been around a long time.
Gravitrx is more of an educational toy, where as hextraction is a game.
Hextraction is also free, which negates copyright risk.
These are pretty well made that I was able to just load and slice them. Except the flipper, I had to print that upside down so the peg was sticking up.
Discussions — Hextraction Beta Basic Tiles! A Hackable Tabletop Game from the Gridfinity guy!
When I try to follow the link to the Fusion 360 source, I keep getting sent to a page that says unauthorized access. Does anyone have any thoughts or suggestions? I have been able to access the game board files and the teleport tiles, but not this set.
Me too, I have been struggling with trying to edit a mesh in Fusion
There's a typo at the beginning of the description, i think you meant to say "this" instead of "these".
스위치 게임 저장 컨테이너는 게임을 안전하게 보관하는 데 매우 유용합니다. 특히, 다양한 게임 카트리지를 정리하고 싶을 때 먹튀스나 상황을 방지할 수 있는 최적의 솔루션입니다. 깔끔하고 견고한 디자인 덕분에, 스위치 게임을 쉽게 관리할 수 있으며, 외출 시에도 편리하게 휴대할 수 있습니다.
A 10 mm ball isnt working with the tracks and wont go through with gravity. Should I use a smaller ball?
Tolerance might be a bit too tight could opt for a 3/8" ball (Which is also recommended) = 9.525 mm
Maybe this slightly smaller ball will fit for your print
Are these tiles compatible with Gravitrax?
probably not. he said in his video that he didn't rip off gravitrax, so i don't see why they would be.
I have many rolls of PLA I barely use anymore. Would you recommend printing in PLA or is it a bad choice? PETG better?
Print with whatever you have on hand. Unless you're going to play in the car, with the car off, and in the summer sun, for >:30m then you might want to pick something other than PLA. ;)
One thing, there is a Tabletop marble course you can build with hexagons called „gravi trax“ that game is actually made my a big German game company. I don’t know if they are looking for copies of the game but this comes pretty close,
I would be careful with this Zack.
https://www.amazon.com.au/GraviTrax-Starter-Kit-STEM-Activity/dp/B07B7HNLMG/ref=sr_1_1
The concept of rolling balls down shutes has been around a long time. Gravitrx is more of an educational toy, where as hextraction is a game. Hextraction is also free, which negates copyright risk.
Do I turn it upside down to print without supports?
These are pretty well made that I was able to just load and slice them. Except the flipper, I had to print that upside down so the peg was sticking up.
Made an attempt at an augmented DIC tile, but failed maybe? Blender is too much for me sometimes. Thanks for sharing
I got really excited about this so I modified the tile to make a cool function. I didn't want to share it publicly. How do I send it to you?
New to this platform but I figured it out.