High-detail "resin" orcs for tabletop RPGs and wargames. Great for display, painting, or battling across Vogland landscapes!

**Behold, Snikket the Best Unseen, Scout for the Vogland Orcs.**

Designed for fun and print-tested on the Piocreate Halot X1 - great results, warts and all. Suitable for all Resin Printers.

🗡 Presupported for easy resin printing
🎯 Sized for 28mm–32mm scale RPGs and wargames (D&D, Warhammer, OPR).
💥 Great for painting practice, conversions, or just freaking out your players.

💬 Follow VogMan for more miniatures, terrain, flexis, and fun printable madness! 

🎥 YouTube: @VogMan


⚙ Features:
Highly detailed 28mm heroic scale orc miniature

Anatomically bold, but fantasy-appropriate

Presupported and unsupported STLs included

Designed for ease of printing and strong table presence

Unbased for flexible integration into custom bases or dioramas

Base provided 

You can find out more about Vogland here: https://www.vogman.co.uk/vogland.php

This Vogland Orc miniature was created for my YouTube viewers — a fun, printable project that brings a bit of Vogland chaos to your tabletop.

👉 Please support my free content by becoming a Patron patreon.com/vegoilguy 👈

Orc - Vogland - Snikket - 28mm Fantasy Miniature

snikket-supported.stl

**Behold, Nuknuk the Self-Certified, master of Orc-Fu and Scout for the Vogland Orcs.**

Designed for fun and print-tested on the Piocreate Halot X1 - great results, warts and all. Suitable for all Resin Printers.

🗡 Presupported for easy resin printing
🎯 Sized for 28mm–32mm scale RPGs and wargames.
💥 Great for painting practice, conversions, or just freaking out your players.

💬 Follow VogMan for more miniatures, terrain, flexis, and fun printable madness! 
🎥 YouTube: @VogMan

 
⚙ Features:
Highly detailed 28mm heroic scale orc miniature
Anatomically bold, but fantasy-appropriate
Presupported and unsupported STLs included
Designed for ease of printing and strong table presence
Unbased for flexible integration into custom bases or dioramas
Base provided

This Vogland Orc miniature was created for my YouTube viewers — a fun, printable project that brings a bit of Vogland chaos to your tabletop.

You can find out more about Vogland here: https://www.vogman.co.uk/vogland.php

👉 Please support my free content by becoming a Patron patreon.com/vegoilguy 👈

Orc - Vogland - Nuknuk– 28mm Fantasy Miniature

nuknuk-supported.stl

**Snorg the Unyielding, a member of the elite Hookaxe Guard halberdiers of the Vogland Orcs.**

Printed on: *Piocreate Halot X1* - Once again, the Halot X1 handled every wart, wrinkle, and weapon detail beautifully

🗡 Presupported for easy resin printing
🎯 Sized for 28mm–32mm scale RPGs and wargames (D&D, Warhammer, OPR).
💥 Great for painting practice, conversions, or just freaking out your players.

🪓 Tip:  The Stompaxe don’t march alone! Expand your Vogland Orc Warband

💬 Follow VogMan for more miniatures, terrain, flexis, and fun printable madness! 

🎥 YouTube: [**@VogMan**](https://youtube.com/@vogman)

If you watched the Vogland video, this is the first Orc of the Stompaxe Infantry you saw brought to life! [**See video here!**](https://youtu.be/Fmxehtx0TXw)

⚙ *Features:*
- Highly detailed 28mm heroic scale orc miniature
- Anatomically bold, but fantasy-appropriate
- Presupported and unsupported STLs included
- Designed for ease of printing and strong table presence
- Unbased for flexible integration into custom bases or dioramas
- Base provided but optional

This Vogland Orc miniature was created for my YouTube viewers — a fun, printable project that brings a bit of Vogland chaos to your tabletop.

👉 Please support my free content by becoming a Patron patreon.com/vegoilguy 👈

Orc - Snorg - Vogland Hookaxe Miniature

orc-halberdier-snorg-BODY-supported.stl

*Druzzag Axebringer, a member of the elite Stompaxe Infantry of the Vogland Orcs.*

Printed on: *Piocreate Halot X1* - Once again, the Halot X1 handled every wart, wrinkle, and weapon detail beautifully

🗡 Presupported for easy resin printing
🎯 Sized for 28mm–32mm scale RPGs and wargames (D&D, Warhammer, OPR).
💥 Great for painting practice, conversions, or just freaking out your players.

🪓 Tip:  The Stompaxe don’t march alone! Expand your Vogland Orc Warband

💬 Follow VogMan for more miniatures, terrain, flexis, and fun printable madness! 

🎥 YouTube: @VogMan

If you watched the Vogland video, this is the first Orc of the Stompaxe Infantry you saw brought to life! [See video here!](https://youtu.be/fYeG5815__w)


⚙ *Features:*
- Highly detailed 28mm heroic scale orc miniature
- Anatomically bold, but fantasy-appropriate
- Presupported and unsupported STLs included
- Designed for ease of printing and strong table presence
- Unbased for flexible integration into custom bases or dioramas
- Base provided but optional


This Vogland Orc miniature was created for my YouTube viewers — a fun, printable project that brings a bit of Vogland chaos to your tabletop.

👉 Please support my free content by becoming a Patron patreon.com/vegoilguy 👈

Orc - Druzzag - Vogland Stompaxe – 28mm Miniature

druzzag-stompaxe-orc-head-supported.stl

*Ogphart Bonebiter, a member of the elite Stompaxe Infantry of the Vogland Orcs.*

Printed on: *Piocreate Halot X1* - Once again, the Halot X1 handled every wart, wrinkle, and weapon detail beautifully

🗡 Presupported for easy resin printing
🎯 Sized for 28mm–32mm scale RPGs and wargames (D&D, Warhammer, OPR).
💥 Great for painting practice, conversions, or just freaking out your players.

🪓 Tip:  The Stompaxe don’t march alone! Expand your Vogland Orc Warband here:  [View the full collection](https://cults3d.com/en/design-collections/VogMan/vogland-orc-warband-miniatures)

💬 Follow VogMan for more miniatures, terrain, flexis, and fun printable madness! 

🎥 YouTube: @VogMan

If you watched the Vogland video, this is the first Orc of the Stompaxe Infantry you saw brought to life! [See video here!](https://youtu.be/fYeG5815__w)


⚙ *Features:*
- Highly detailed 28mm heroic scale orc miniature
- Anatomically bold, but fantasy-appropriate
- Presupported and unsupported STLs included
- Designed for ease of printing and strong table presence
- Unbased for flexible integration into custom bases or dioramas
- Base provided but optional


This Vogland Orc miniature was created for my YouTube viewers — a fun, printable project that brings a bit of Vogland chaos to your tabletop.

👉 Please support my free content by becoming a Patron patreon.com/vegoilguy 👈

Orc - Ogphart - Vogland Stompaxe – 28mm Miniature

ogphart-stompaxe-orc-head-supported.stl

*Thrakkak the Enthused, a member of the elite Stompaxe Infantry of the Vogland Orcs.*

Printed on: *Piocreate Halot X1* - Once again, the Halot X1 handled every wart, wrinkle, and weapon detail beautifully

🗡 Presupported for easy resin printing
🎯 Sized for 28mm–32mm scale RPGs and wargames (D&D, Warhammer, OPR).
💥 Great for painting practice, conversions, or just freaking out your players.

🪓 Tip:  The Stompaxe don’t march alone! Expand your Vogland Orc Warband here:  [View the full collection](https://cults3d.com/en/design-collections/VogMan/vogland-orc-warband-miniatures)

💬 Follow VogMan for more miniatures, terrain, flexis, and fun printable madness! 

🎥 YouTube: @VogMan

If you watched the Vogland video, this is the first Orc of the Stompaxe Infantry you saw brought to life! [See video here!](https://youtu.be/fYeG5815__w)


⚙ *Features:*
- Highly detailed 28mm heroic scale orc miniature
- Anatomically bold, but fantasy-appropriate
- Presupported and unsupported STLs included
- Designed for ease of printing and strong table presence
- Unbased for flexible integration into custom bases or dioramas
- Base provided but optional


This Vogland Orc miniature was created for my YouTube viewers — a fun, printable project that brings a bit of Vogland chaos to your tabletop.

👉 Please support my free content by becoming a Patron patreon.com/vegoilguy 👈

Orc - Thrakkak - Vogland Stompaxe – 28mm Miniature

thrakkak-orc-body-supported.stl

**VOGLAND CASTLE DICE TOWER**
Embark on epic adventures with this highly detailed Vogland Castle Dice Tower, a phenomenal addition to your miniature fantasy world.

👉 **FOLLOW ME... AND TELL ME WHAT OTHER FREE PRINTS YOU'D LIKE TO SEE...** 👈

After receiving requests, this miniature fantasy detailed **dice tower**, which was originally crafted as a 32mm Castle Tower ([HERE](https://thangs.com/designer/VOGMAN/3d-model/980377)), has been restructured to include arched windows, arrow slots, and a twisty internal tube for rolling the dice.

For a little about Vogland and the inspiration for my miniatures, please click [HERE](https://vegoilguy.co.uk/miniatures.php)

**SECTIONS**
The castle / tower is divided into separate, stackable sections for easier printing via **both Resin and FDM** methods. In addition to the practical stud and socket design for secure assembly, the model includes witness marks for clear alignment. Furthermore, the rough stonework gives an authentic castle feel to the 3D model. 

**DICE SIZE**
Fulfilling your RPG and tabletop gaming needs, this 3D fantasy miniature, designed with utmost attention to detail, is categorized to fit dice of 20mm size or smaller. However, you can easily upscale the model to incorporate larger dice - for instance, scale files to 116% for a 23mm door opening or 125% for 25mm. 

**SUPPORTS**
This 3D model is designed to print with minimal support, while some might be necessary from the plate to the underside.

**IMPORTANT – RESIN PRINTING**
For resin prints, we recommend filtering the resin and cleaning the FEP after each print. 

**LEGALITIES & USE**
©Copyright VogMan December 2023. Please respect my copyright / authorship. These files are strictly for personal use. No commercial use is allowed. Do not sell or otherwise distribute this work.

**LEGALITIES & USE**
©Copyright VogMan January 2025. Please respect my copyright / authorship. These files are strictly for You are allowed to create physical 3D prints and, if you wish, share images of these on social media or websites, though proper attribution to VogMan is requested. However, Personal Use does not permit selling, distributing, modifying, or sharing these physical 3D prints or the digital files downloaded. Personal Use means just for you!

**COMMERCIAL LICENSES**
Registered VogMan Patron Commercial License holders may print and sell this item in strict accordance to the registered license. However, the digital files remain the property of Vogman and the Commercial License does not permit selling, distributing, modifying, or sharing digital files. In short, The STLs remain the exclusive property of VogMan.
If you do not hold a Registered VogMan Commercial License, then you are legally restricted to Personal Use only.
For more details about my commercial licensing, **[click here](https://www.vegoilguy.co.uk/commercial-license-info.php)**.

**FIND ME HERE**
https://www.patreon.com/vegoilguy 
https://www.youtube.com/@vogman
https://linktr.ee/vogman 
https://www.instagram.com/the_vogman 
https://www.facebook.com/thevogman 
https://www.etsy.com/shop/VegOilGuy 
http://www.vogman.co.uk 

**CONTACT DETAILS**
https://www.vegoilguy.co.uk/contact_general.php

Vogland Castle Dice Tower

floor-one-decd.stl

ground-floor-decd.stl

top-floor-decd.stl

This **Vogland Orc** was created for my YouTube viewers specifically for something fun to easily print and paint. This version finds the Vogland Hogrider sitting upon his magnificent steed, the infamous Vogland Suicide Pig. Whilst small and cute in stature, the Vogland Pig has probably the tastiest meat in Vogland. However, nature has been kind to it, giving it incredible strength and such a violent disposition that trying to eat one is tantamount to Suicide. Probably for this reason, they’ve struck up an uneasy alliance with the Vogland Orcs, whereby neither species eats the other.

For a little about Vogland and the inspiration for my miniatures, please click [HERE](https://vegoilguy.co.uk/miniatures.php)

When printed and assembled, he stands approx 50mm. There are both supported and unsupported STLs.

**_If you print and paint him, then please post a pic on Instagram #vogorc_**

**ORC BACKGROUND**

So I’ve had a few questions about the Vog Orc, mostly along the lines of, “Where’s his trousers?”
Well, this is because the Orc’s of Vogland are a strange breed. Fiercely proud of their shiny codpieces, they typically wear nothing else, other than a stout pair of boots. 
Even their armour is skimpy. Vogland Orc’s generally stare across the battlefield, locking eyes with their foes, and polishing their codpieces with great enthusiasm. This alone is usually enough to disturb the enemy.
Download the Vog Orc and paint him any way you like… just have fun doing it and don’t take it too seriously. That way lies madness!

**JUST ONE STIPULATION**... if you feature this in a YouTube video, please name me and provide a Link to this file **AND** to [my YouTube Channel](https://www.youtube.com/@vogman)

**FIND ME ON...**
https://linktr.ee/vogman 
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman 
https://www.facebook.com/thevogman 
https://rumble.com/c/VOGMAN 
https://www.patreon.com/vegoilguy 
https://www.etsy.com/shop/VegOilGuy 
http://www.vogman.co.uk 

Vogland Orc Hogrider miniature

body-hogrider-supported.stl

This **Vog Orc** was created for my YouTube viewers specifically for something fun to easily print and paint. I was exploring the Slapchop painting technique at the time and thought this little guy would work perfectly for that.

For a little about Vogland and the inspiration for my miniatures, please click [HERE](https://vegoilguy.co.uk/miniatures.php)

When printed and assembled, he stands approx 50mm. There are both supported and unsupported STLs.

**_If you print and paint him, then please post a pic on Instagram #vogorc_**

**ORC BACKGROUND**

So I’ve had a few questions about the Vog Orc, mostly along the lines of, “Where’s his trousers?”
Well, this is because the Orc’s of Vogland are a strange breed. Fiercely proud of their shiny codpieces, they typically wear nothing else, other than a stout pair of boots. 
Even their armour is skimpy. Vogland Orc’s generally stare across the battlefield, locking eyes with their foes, and polishing their codpieces with great enthusiasm. This alone is usually enough to disturb the enemy.
Download the Vog Orc and paint him any way you like… just have fun doing it and don’t take it too seriously. That way lies madness!

**JUST ONE STIPULATION**... if you feature this in a YouTube video, please name me and provide a Link to this file **AND** to [my YouTube Channel](https://www.youtube.com/@vogman)

**FIND ME ON...**
https://cults3d.com/@vogman
https://linktr.ee/vogman 
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman 
https://www.facebook.com/thevogman 
https://rumble.com/c/VOGMAN 
https://www.patreon.com/vegoilguy 
https://www.etsy.com/shop/VegOilGuy 
http://www.vogman.co.uk 

Vogland Orc miniature

head-supported.stl

**_Vogland Orcs_** were created for my YouTube viewers specifically for something fun to easily print and paint. This version shows the largest of the Orcs, the Berserker, complete with his Toffee hammer (the Berserkers love their toffee).  

For a little about Vogland and the inspiration for my miniatures, please click [HERE](https://vegoilguy.co.uk/miniatures.php)

He's much larger than other Vogland Orcs, but you can exchange the head with others already provided by increasing them in size by 20%.

**PUPILS**
To make painting easier, I indented pupils in the eyes. I like how it's turned out. However, I've included a head without sunken pupils who prefer more challenging painting.

If you print or maybe paint him, then please post a pic here, or maybe on Instagram #vogorc

**SUPPORTS**

I've provided **_both supported and unsupported files_**. The Hammer is quite large, so this has been hollowed in my supported version.

**JUST ONE STIPULATION…** if you feature this in Social Media, please name me and provide a Link to this file AND to my YouTube Channel

**FIND ME ON…**
https://cults3d.com/@vogman
https://linktr.ee/vogman 
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman 
https://www.facebook.com/thevogman 
https://rumble.com/c/VOGMAN 
https://www.patreon.com/vegoilguy 
https://www.etsy.com/shop/VegOilGuy 
http://www.vogman.co.uk 

Vogland Orc Beserker Miniature (with and without supports)

orc-berserker-body-supported.stl

This **Vogland Orc** was created for my YouTube viewers specifically for something fun to easily print and paint. This version finds the Vogland Orc in his most natural state, wearing nothing but boots, a shiny codpiece, his favourite polishing gloves and a look of grim determination.

When printed and assembled, he stands approx 50mm. There are both supported and unsupported STLs.

**PAINTING TUTORIAL**
This guy really is easy to paint using the Slapchop method. I did video painting tutorial which you may enjoy: https://youtu.be/74sokkUFPHQ

**_If you print and paint him, then please post a pic on Instagram #vogorc_**

**ORC BACKGROUND**
So I’ve had a few questions about the Vog Orc, mostly along the lines of, “Where’s his trousers?”
Well, this is because the Orc’s of Vogland are a strange breed. Fiercely proud of their shiny codpieces, they typically wear nothing else, other than a stout pair of boots. 
Even their armour is skimpy. Vogland Orc’s generally stare across the battlefield, locking eyes with their foes, and polishing their codpieces with great enthusiasm. This alone is usually enough to disturb the enemy.
Download the Vog Orc and paint him any way you like… just have fun doing it and don’t take it too seriously. That way lies madness!

**JUST ONE STIPULATION... **if you feature this in a YouTube video, please name me and provide a Link to this file AND** to my YouTube Channel

**FIND ME ON**
[https://www.youtube.com/@vogman](url)
[https://www.instagram.com/the_vogman](url)
[https://www.facebook.com/thevogman](url)
[https://www.patreon.com/vegoilguy](url)
[https://www.etsy.com/shop/VegOilGuy](url)

Vogland Orc Au Naturel

head-orc-au naturel.stl

Vogland Orc Warband Miniatures

Dice Tower Zombie Head (Resin & FDM / presupported & Support free)

FDM-zombie-dice-tower - BambuLab.3mf

Modular Medieval Castle GATEHOUSE – 28mm Wargaming Terrain

GATEHOUSE-LEVEL1.stl

3D Printed Roman Catapult (Working Onager Siege Engine)

arm.stl

140K+ [YouTuber](https://youtube.com/@vogman)  sharing creative 3D prints, DIY builds, and tech experiments you can actually make. From flexi toys to cosplay props, everything here is built for real makers who like to have fun.
Follow VogMan for more epic prints and crazy projects! 🎥

VOGMAN

Achievements

Seedling

Fan Favorite

Trailblazer