Articulated, wiggly, and just-for-fun prints! Easy to print, fun to fidget with, and great for gifting or display.

This is a 4:1 stackable Planetary Gearbox, designed with just enough slack in the system to mean it should work perfectly first time. I've printed a few other such gearboxes and couldn't get them to work because the tolerances were too high... this shouldn't be a problem here. Stackable means you can print two or more gearboxes and insert them into each other, increasing the overall output ratio, ie 4:1, 16:1, 64:1, etc. 
VERY easy print - no supports required) and the video below demonstrates how things are easily fitted together.

JUST ONE STIPULATION... if you feature this in a YouTube video, please name me as the Creator and provide a Link to this file AND to my follow my YouTube Channel.

https://youtu.be/0ow4x0jadJY

Planetary Gearbox 4:1 Stackable

sun.stl

This Zombie Head Dice Tower is a collaboration from [Printed Obsession](https://thangs.com/designer/printedobsession) and VogMan. Designed to look like it will eat you if you don’t follow the game rules properly, this dice tower is a free fun download happy on the game table or the display shelf.

Standing approx. 170mm tall, it has an internal chute of roughly 38mm making it large enough to cope with most dice. There’s also a dice bowl with internally sloped walls which, rumour has it, can help keep the dice from bouncing out… but fate is fickle.

**Provided Images : **It’s important to note that the photographs were taken of the original design which unfortunately had a habit of falling over. Whilst this is true of most zombies, it ruined game play and so a base was quickly added to stabilise it, and that’s the version you’ll find here.

**Resin Version :** Both supported and support free versions are here, hollowed and ready to go.

**FDM Version :** The resin version can be printed on FDM, but supporting may be challenging and some clean up will be likely. The FDM version is much easier to support and print, and a support free version is available as well as a 3MF file. The Dice Bowl needs no supports.

 https://youtu.be/9sgQfhUDDrM

Credits: My personal thanks to [Printed Obsession](https://thangs.com/designer/printedobsession) for kindly providing the original design for this dice tower, and also the Morgan 3D Creations for test printing the FDM versions and providing the 3MF file.

Dice Tower Zombie Head (Resin & FDM / presupported & Support free)

Resin-zombie-dice-tower-SUPPORTED.stl

Tony Stark would argue that Iron Man is ALWAYS trending, so here's a fun cute wiggle print of the metal man himself.

👉 **Please support my free content by becoming a Patron [https://patreon.com/vegoilguy](https://patreon.com/vegoilguy)** 👈

**FDM**
No supports are needed. Just place the file flat of the plate and it will print happily. It printed easily for me with a standard 0.4 nozzle, 0.200 layer height, 15% infill.

**RESIN**
Resin printers can print without supports. Just place the file flat of the plate. However, this may produce a "tidemark" on the finished prints. This is something that happens with resin printers and is not the fault of the design. To avoid this I would recommend pitching the model at least 2.5 degrees on both the X and Y, then support as necessary. 

**REQUESTS**
Got any requests for models you'd like to see made? I can't make any promises, but I'm happy to hear from folks. Just Follow me and drop me a line.

**LEGALITIES & USE**
©Copyright VogMan March 2025. Please respect my copyright / authorship. These files are strictly for Personal Use. You are allowed to create physical 3D prints and, if you wish, share images of these on social media or websites, though proper attribution to VogMan is requested. However, Personal Use does not permit selling, distributing, modifying, or sharing these physical 3D prints or the digital files downloaded. Personal Use means just for you!

**COMMERCIAL LICENSES**
Registered VogMan Patron Commercial License holders may print and sell this item in strict accordance to the registered license. However, the digital files remain the property of Vogman and the Commercial License does not permit selling, distributing, modifying, or sharing digital files. In short, The STLs remain the exclusive property of VogMan.
If you do not hold a Registered VogMan Commercial License, then you are legally restricted to Personal Use only.
For more details about my commercial licensing, **[click here](https://www.vegoilguy.co.uk/commercial-license-info.php)**

**FIND ME HERE**
https://www.patreon.com/vegoilguy 
https://www.youtube.com/@vogman
https://linktr.ee/vogman 
https://www.instagram.com/the_vogman 
https://www.facebook.com/thevogman 
https://www.etsy.com/shop/VegOilGuy 
http://www.vogman.co.uk

**CONTACT DETAILS**
https://www.vegoilguy.co.uk/contact_general.php

Cute Wiggle Iron Man (articulated)

wiggle-ironman.stl

**Bring your favourite astromech to life with this fun, print-in-place R2-D2 Wiggle Bot!**

Designed for Star Wars fans and 3D printing enthusiasts alike, this articulated model features built-in joints that allow it to wiggle and move — all without any assembly required. Just print, pop it off the bed, and it's ready to roll (or wiggle)!

- ✅ **Print-in-Place** – No supports, glue, or assembly needed
- 🤖 **Articulated Design** – Wiggly legs and rotating head for added personality
- 🪐 **Inspired by Star Wars** – A playful take on the galaxy's most iconic droid
- 🖨️ **Optimized for FDM printers** – Best results at 0.2mm layer height

Perfect as a fun desk toy, display piece, or gift for sci-fi lovers.

👉 **Please support my free content by becoming a Patron [https://patreon.com/vegoilguy](https://patreon.com/vegoilguy)** 👈

**FDM**
No supports are needed. Just place the file flat of the plate and it will print happily. It printed easily for me with a standard 0.4 nozzle, 0.200 layer height, 15% infill.

**RESIN**
Resin printers can print without supports. Just place the file flat of the plate. However, this may produce a "tidemark" on the finished prints. This is something that happens with resin printers and is not the fault of the design. To avoid this I would recommend pitching the model at least 2.5 degrees on both the X and Y, then support as necessary. 

**REQUESTS**
Got any requests for models you'd like to see made? I can't make any promises, but I'm happy to hear from folks. Just Follow me and drop me a line.

**LEGALITIES & USE**
©Copyright VogMan March 2025. Please respect my copyright / authorship. These files are strictly for Personal Use. You are allowed to create physical 3D prints and, if you wish, share images of these on social media or websites, though proper attribution to VogMan is requested. However, Personal Use does not permit selling, distributing, modifying, or sharing these physical 3D prints or the digital files downloaded. Personal Use means just for you!

**COMMERCIAL LICENSES**
Registered VogMan Patron Commercial License holders may print and sell this item in strict accordance to the registered license. However, the digital files remain the property of Vogman and the Commercial License does not permit selling, distributing, modifying, or sharing digital files. In short, The STLs remain the exclusive property of VogMan.
If you do not hold a Registered VogMan Commercial License, then you are legally restricted to Personal Use only.
For more details about my commercial licensing, **[click here](https://www.vegoilguy.co.uk/commercial-license-info.php)**

**FIND ME HERE**
https://www.patreon.com/vegoilguy 
https://www.youtube.com/@vogman
https://linktr.ee/vogman 
https://www.instagram.com/the_vogman 
https://www.facebook.com/thevogman 
https://www.etsy.com/shop/VegOilGuy 
http://www.vogman.co.uk

**CONTACT DETAILS**
https://www.vegoilguy.co.uk/contact_general.php

Star Wars R2-D2 Wiggle Bot – Articulated Print-in-Place STL

r2rd-articulated-by-VogMan.stl

Flexi and Fun!

FDM-zombie-dice-tower - BambuLab.3mf

Modular Medieval Castle GATEHOUSE – 28mm Wargaming Terrain

GATEHOUSE-LEVEL1.stl

3D Printed Roman Catapult (Working Onager Siege Engine)

arm.stl

140K+ [YouTuber](https://youtube.com/@vogman)  sharing creative 3D prints, DIY builds, and tech experiments you can actually make. From flexi toys to cosplay props, everything here is built for real makers who like to have fun.
Follow VogMan for more epic prints and crazy projects! 🎥

VOGMAN

Achievements

Seedling

Fan Favorite

Trailblazer

Flexi and Fun!

Planetary Gearbox 4:1 Stackable

Dice Tower Zombie Head (Resin & FDM / presupported & Support free)

Cute Wiggle Iron Man (articulated)

Star Wars R2-D2 Wiggle Bot – Articulated Print-in-Place STL