Tuure11 followers

Brio spiral track

209 downloads · 5 years ago · Stand offs for Brio track for constructing a spiral track. Here's a video demonstration: [https://yo

Description

Stand offs for Brio track for constructing a spiral track. Here's a video demonstration: https://youtu.be/8Y88ZjxNU2E

Community Makes (3)

There were the first prints with my 3D printer so some of the pieces are quite rough, but it is functiononal. I also printing a couple extra (No. 5 and the other 122mm support to allow the trains to ascend / decend easier.

Printed really well but was a bit unstable on the carpet with the nephew using it, so custom made some circular bases and now it's perfect 👌

Community Makes (3)

Discussions

GmillsyAUS10 months ago

There were the first prints with my 3D printer so some of the pieces are quite rough, but it is functiononal. I also printing a couple extra (No. 5 and the other 122mm support to allow the trains to ascend / decend easier.

PrinterCreality Ender 3 S1 Pro

MaterialPLA+

SupportsNone

BrimNo

jake.gravell1 year ago

Printed really well but was a bit unstable on the carpet with the nephew using it, so custom made some circular bases and now it's perfect 👌

PrinterBambu Lab P1P

MaterialPLA

rob623906 months ago

Did you share the base support somewhere?

pichlalex6 months ago

i recreated them... you can find them here: https://thangs.com/designer/pichlalex/3d-model/1490607

pichlalex6 months ago

PrinterOther

Printer modelHTA 3D steel

MaterialPLA

Layer height0.2 mm

Infill density20 %

pichlalex6 months ago

i created the circular bases from jake.gravell and uploaded it here: https://thangs.com/designer/pichlalex/3d-model/1490607

gorksmash7 months ago

I made some supports for the bottom due to the other user saying it was a little unstable. I can share my version but I am not sure how to share a remix

GmillsyAUS1 year ago

Hi Jake, Would it be possible to get the support files to add stability to mine?