Putting Game

A different way to practice your putting! Not only can this model be used to practice your putting, but it was primarily intended to be a cross between putting and cornhole. There are 3 different sized targets to putt at. You could play 1v1, 2v2, or more, and scoring can be done similarly to how you score in cornhole. You are also free to make up whatever rules you want!

The design prints support free with the different pieces either snapping or sliding together after printing.

Printing Info: These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM - FDM - Best with PETG or other High Temp Material if it will be used outdoors. Scaling: Can be scaled up, scaling down may cause issues with interfacing parts. Supports: None Infill/Perimeters: 15% Infill + 2 Perimeters Nozzle Size: 0.4 Layer Height: 0.2

Printing & Assembly: No supports needed. There are 3 different sized targets. Small, medium, and large. Each target is made up of a housing, ramp, and optional score flag. After printing, the ramp just presses into place in the housing with the alignment "bumps."

File List (9):

• housing (small) (STL)
• housing (medium) (STL)
• housing (large) (STL)
• ramp (small) (STL)
• ramp (medium) (STL)
• ramp (large) (STL)
• flag (1 point) (STL)
• flag (2 point) (STL)
• flag (3 point) (STL)