3D Printable Earring - Triangle Trickle Hollow

Finally ready to release my first little collection of 3D printable jewelry after working on and off for the last 3 months

It consists of 4 different versions of earrings named Triangle Trickle. I'm really curious how it will be received because this is way out of my comfort zone😊

Versions full, line & hollow are single part prints. Version color is a multipart print (earring and color inset) that needs to be glued together.

All earrings are quick and easy prints. You can add an extra touch by using sparkle filament or print on pattern transfer bed plates.

All versions of the earrings are available with a flat or upright ring to attach hooks or pins. You can get those on Amazon:

US

• https://amzn.to/3XZkn55 (affiliate link)

EU

• https://amzn.to/4eVo69T (Amazon BE - affiliate link)
• https://amzn.eu/d/0fKqgYSS (Amazon DE)
• https://amzn.eu/d/08mr7WF5 (Amazon UK)

You can find the other versions here

• Full
• Line
• Color

Print instructions

• Since the earrings have fine details and print-in-place features bed adhesion is key.
• Print with front towards the bed plate
• Initial layer height: 0.2
• Layer height: 0.08
• Wall generator: Arachne
• No supports needed
• 100% infill
• Outer wall speed: 60mm/s
• Inner wall speed: 120mm/s
• Overhang speed: 60mm/s
• Bridge speed: 50mm/s
• Infill & top surface speed: 150mm/s

Once printed you need to carefully bend the little legs up and down to free them up

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Companion subscription.