tracking pixel
Blob Lab

Blob Gecko - Flexi Magnetic Art Toy with Rock

by
BlobLab
Follow
Follow
Remix Model
ThangsDennis
ThangsDennis
|
|
Image 10 of 12
Blob Gecko - Flexi Magnetic Art Toy with Rock - Strongly recommend a brim. Tried without and it didn’t work. - 3d model
ThangsDennis
ThangsDennis
|
|
Image 10 of 12
Blob Gecko - Flexi Magnetic Art Toy with Rock - Strongly recommend a brim. Tried without and it didn’t work. - 3d model
2D
3D
Makes
Blob Gecko - Flexi Magnetic Art Toy with Rock 3d model
Blob Gecko - Flexi Magnetic Art Toy with Rock 3d model
Blob Gecko - Flexi Magnetic Art Toy with Rock 3d model
Blob Gecko - Flexi Magnetic Art Toy with Rock 3d model
Blob Gecko - Flexi Magnetic Art Toy with Rock 3d model
Blob Gecko - Flexi Magnetic Art Toy with Rock 3d model
Blob Gecko - Flexi Magnetic Art Toy with Rock 3d model
Blob Gecko - Flexi Magnetic Art Toy with Rock 3d model
Blob Gecko - Flexi Magnetic Art Toy with Rock 3d model
Blob Gecko - Flexi Magnetic Art Toy with Rock - Strongly recommend a brim. Tried without and it didn’t work. - 3d model
Blob Gecko - Flexi Magnetic Art Toy with Rock 3d model
Blob Gecko - Flexi Magnetic Art Toy with Rock - Blob Lab Gecko  - 3d model
This model is restricted by licensing terms. 

BLOB GECKO

This cute flexi gecko can stick to your fridge and look around. Make sure your gecko gets enough sun by bathing on it's rock!

  • flexible legs and tail
  • articulating head
  • magnetic feet and hidden/no magnet version
  • print-in-parts and multicolor files included
  • bonus rock container

PERSONAL USE ONLY

Purchasing or downloading this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to patreon.com/bloblab

COPYRIGHT PROTECTED FILES

All Blob Lab designs are protected under copyright law. Your purchase does not give you the right to sell or distribute the digital files in any way.

PRINT INSTRUCTIONS

  • 2mm standard layer height
  • no supports
  • brim recommended
  • 3x8mm magnets fit 100% scale, they should press fit, but may need glue depending on your printer. For the hidden magnet version, right click on your slicer timeline and "add stop" at the 4mm mark to place your magnets.
  • eyes snap in head, head snaps on body

121 Likes173 DownloadsApril 15, 2024


121 Likes173 DownloadsApril 15, 2024
This model is restricted by licensing terms.