Mini Meal Clickers + Mini Collab x SugarPaws3D
Henlo beans!! 💖
I have a release for you today I've been procrastinating that I ended up mini collabing with the wonderful SugarPaws3D!! 🍔✨
For my half of the mini collab, I made a little meal set complete with burgers, fries, a drink, tray, napkin, and even a takeout box 🥹
The really fun part though is that me and SugarPaws traded burgers and containers, so you can mix and match pieces from both sets to make your own little meals!! 💖
Her burgers are SO cute and chonky 😭 I was honestly obsessed the first time I saw them. I love the fuzzy texture on the patties!! They are so detailed!! They fit the containers perfectly and look adorable mixed in with my pieces.
Everything is tiny, portable, and super fun to fidget with while working or watching videos. The little takeout boxes are super fun because you can
Definitely go check out SugarPaws' side of the set too and show her some love!! 🥹💖
🍔🐱 BONUS STICKER PNG
I also included a little bonus Hampurrger sticker PNG!!
I couldn't resist turning a hamburger into a hampurrger!!
This little friend is included in the Download Hub as a bonus PNG and can be used for homemade sticker projects.
Please only use this PNG I included as a bonus for homemade stickers (it is located in the download hub without the background!). The license for my PNGs does not allow production/manufactured stickers, other merchandise, or redistribution. Commercial use for homemade stickers is included for active Patreon subscribers with a valid commercial license 💖
WHAT'S INCLUDED
• Burger Clickers STL & 3MF (from I and SugarPaws3D!!)
• Fries Clicker STL & 3MF
• Drink Clicker STL & 3MF
• Takeout Box STL & 3MF
• Tray STL & 3MF
• Napkin STL & 3MF
• Hampurrger Sticker
RECOMMENDED PRINT SETTINGS
• Layer Height: 0.16
• Infill: 15%
• Filament: Matte or regular PLA
• Adaptive Layers recommended for smoother effect
• These are clickers and are not to be resized
• The hamburger top bun for my mini meal requires supports!!
CLICKER NOTES & TROUBLESHOOTING
• These are clickers and are not to be resized. Please do a test print to ensure a good fit!
• The hamburger top bun for my mini meal requires supports.
• Missing the clicker "+" attachment piece after printing? It likely did not adhere to the build plate. Try washing your plate with soap and water, increasing bed temperature by about 4°C, adding a brim, and reprinting the affected piece.
• If your clicker feels unusually wobbly, make sure it is fully seated in the print. You can also gently bend the metal pins on the underside of the clicker inward , as they may not be making full contact with the print. Snipping them off works even better!
• Make sure all supports and brim material are fully removed before assembly. Small leftover pieces can affect how the clicker feels.
• Clickers should fit snugly. If parts are excessively loose or tight, your printer tolerances may differ slightly and may require minor calibration adjustments. You can size up or down by .1%.
• If using a textured plate, ensure small pieces have adhered properly before leaving the print unattended.
Other Notes:
✨ My designs are not recommended for young children or anyone at risk of choking hazards, as some parts may be small. They are also not food safe, as always with 3D prints.
✨ I make all of my designs from scratch in Blender without the use of AI. I will be recording my process more this summer if I have the time, and making more videos. You can check my channel out here!: https://www.youtube.com/@StarMouse3D
Stay sillyl!!
Mouse 🐭✨