This is one of the funnest 3d printable designs your kids and even big kids will love. The GLOVES OF GLORY mechanism is completely print in place for a quick assembly and maximum durability.  Size is customizable for hands and fingers big and small.

1. 
Select the adult or kid size.

2. measure your finger tips below the first knuckle to choose best fit.

3.  Slide finger rings into place and armatures into their slots and PRESTO- you're throwing fists!

CYBER CLAWS... NOW WITH MINI BOXER GLOVES!!!!!

With fast action and faster assembly thanks to it's well designed print-in-place mechanism.

With 3 pre-sized plates, and a completely scalable design you can print a set for the kids - and even the BIGGEST kids! BUT DON'T POKE AN EYE OUT.

To print this model:

1. Ensure you do not have supports turned on for the mechanism objects.

2. The mechanisms come off the plate stiff, but only take a quick crack to free the joints. To release joints squeeze the opposite corners while wrapped in a cloth to avoid a pinched finger.

3. With all joints free-moving, rapidly move each joint in the mechanisms to work it in, moving back and forth for the full range, and apply a slight twist pressure.
This warms up the internal surfaces and cleans up bits that may cause unwanted friction.

4. Before adding the blades - use the tab on the blade to pop out supports inside the blade slot.

CYBER CLAWS PRINT IN PLACE MECHANISM

CYBER CLAW jan 16.3mf

MED BOXERCYBER PIN tight on right.stl

LG BOXERCYBER PIN tight on right.stl

SM BOXERCYBER PIN tight on right.stl

THE AMAZING MINI BOXERS - NOW COME WITH THE CYBER CLAW PACK!

This reliable print in place mechanism makes for fast assembly, fast action and print strength! Print them for friends.... or your kids, or your friends kids... and their friends!

BUT WHO WILL BE THE CHAMPION??!!

The all-in-one arms comes off the plate stiff, but only takes a quick crack to free the joints.

FOR BEST PERFORMANCE.

1. Ensure you do not have supports turned on for the mechanism objects. And boxing glove infill should be low ( 5-10% gyroid is great).

2. To release the joints.  Squeeze the opposite corners while wrapped in a cloth to avoid a pinched finger.

3. With all joints free-moving, rapidly move each joint in the mechanisms to work it in, moving back and forth for the full range, and apply a *slight* twist pressure.
This warms up those internal surfaces and cleans up bits that may cause unwanted friction.

4. Before adding the gloves - use a toothpick or fork to pop out a little circular support inside the blade slot.

---

The are three sizes in the project. Print same size plates. Large for adults. Small and medium for kids. If you do need to adjust sizing, you'll need to scale everything - or let me know your measurements and I can make rings that fit better.

I hope you find it as fun as I do! Happy printing!

We're always tweaking our models and appreciate you feedback!


MINI BOXER "GLOVES OF GLORY" PRINT IN PLACE

3A boxer pip SMALL parts dec 19.stl

1A boxer pip LARGE parts dec 19.stl

2A boxer pip MEDIUM parts dec 19.stl

CYBER CLAWS MINI BOXER jan 26.3mf

LG Cyber Knives jan 26.stl

MED Cyber Knives jan 26.stl

SM Cyber Knives jan 26.stl

GLOVES OF GLORY (FISTS OF FURY)

Welcome Spooligans! Subscribe to our basic plan for access to print up to FOUR Spooligan Labs printables per month, for personal use.

To have Spooligan Labs toys featured in your store, please see the Makers plan!

This plan is subject to change without notice.

Spooligan's Basic

This plan is being phased out, check out Spooligan basic!

The Spooliganian!

boxer champ belt.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

SpooliganLabs

GLOVES OF GLORY (FISTS OF FURY)

CYBER CLAWS PRINT IN PLACE MECHANISM

MINI BOXER "GLOVES OF GLORY" PRINT IN PLACE