Combination 9v Battery Dispenser + Business card Dispenser + Sticker Dispenser

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3014467.

In my work I use a lot of 9v batteries, business cards and stickers. I made this to fit inside my tool bag and make all 3 accessible.

The battery dispenser can hold up to 8 batteries per stack for a total of 24 batteries. The Battery grippers should be printed in flex and glued in place. I find that the batteries tend to bounce in the back of my ute and work their way out of the dispenser without the grippers.

The Card Dispenser can hold more than 500 cards, maybe up to 900.

The sticker dispenser holds a roll of 1000 stickers although your mileage will vary with sticker size.

The battery dispenser and card dispenser can be printed and used on their own however the sticker dispenser will need modification to be used on its own.

The card dispenser lid is a loose fit so I included a lid lock, you could always thicken the lid slightly to make it a tight fit.

I included a device to help with bending the springs, I admit its not the best, but I bent 10 springs with it, couldn't be that bad right? They came out much better than when I bent the springs with pliers. If I were to make another I'd try threaded inserts rather than square nuts, or maybe printed platforms rather than screws.