Bigger Elephant Cutlery Strainer - No Support - With or Without Divider

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2983347.

A friend of mine lives in a share house and wanted a bigger version of the Elephant cutlery strainer. I increased the X and Y to 150% and the Z to 125%. Teaspoons kinda disappear in there but it seems to be a good height for most other things.

I added a divider to help everything stand up. Again, teaspoons can slip under the divider so you may want to modify it, I don't mind that they slip under.

I included the original no support elephant strainer in the photos for reference. The original is blue, and this version is the pink.

Printed in Hobbyking Pink PLA at .2 layer height and mostly 10% infill, I used 40% under top layers . I started at 210 degrees which worked well for overhangs but when it came to top layers I found I was getting under extrusion so I bumped it to 220.

This is the no support version, however I did print this with a single line of support inside the trunk just in case, i just slid something inside and rammed out the support. If you print this without it leave a comment to let others know how you went.

Oh, uhhh, don't worry about the eye, that was an error in print settings, not in the model.

Print took 32 hours and about 550g of filament according to the software.

Modified in Fusion 360.