Full collection of the Non-sleeved Digimon card boxes - 125/250/500/1000/1500

Sizes:
125 Cards - 60mm x 81mm x 105mm
250 Cards - 110mm x 81mm x 105mm
500 Cards - 210mm x 81mm x 105mm
1000 Cards - 210mm x 152mm x 105mm
1500 Cards - 210mm x 223mm x 105mm

Not for commercial use and only personal printing.
Follow for future updates and new designs.

1500 Card Deck Box - Digimon - (88mmx64mm) Non-Sleaved.

Version 2 is here with click on lid and slotted divider design, store your cards with piece of mind that they wont get damaged!

Card boxes I have always found expansive and never suited to the need of mass storage with out it being a cardboard box. Protect your cards in a ridged box.
Really easy to print, best to have a PEI textured surface with glue.
Suggested Filament: PLA+ (DO NOT USE SILK)
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: However you please but I use 25% progressive halved every 10mm (max 5 times)
Shell: 3 layers on wall, 4 on top and bottom with one wall for roofing
Speed: 150mm, 50% on bottom and top layers
Cooling: yes
Supports: Not required
Max angles: 45 Degrees

Size: 1500 Cards - 210mm x 223mm x 105mm

Not for commercial use and only personal printing.
Follow for future updates and new designs

Digimon Card Box V2 - Non Sleeved - 1500 Cards

Deck box V2 - 1500 - Digimon - Non-Sleeved.stl

1000 Card Deck Box V2 - Digimon - (88mmx64mm) Non-Sleaved.

Version 2 is here with click on lid and slotted divider design, store your cards with piece of mind that they wont get damaged!

Card boxes I have always found expansive and never suited to the need of mass storage with out it being a cardboard box. Protect your cards in a ridged box.
Really easy to print, best to have a PEI textured surface with glue.
Suggested Filament: PLA+ (DO NOT USE SILK)
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: However you please but I use 25% progressive halved every 10mm (max 5 times)
Shell: 3 layers on wall, 4 on top and bottom with one wall for roofing
Speed: 150mm, 50% on bottom and top layers
Cooling: yes
Supports: Not required
Max angles: 45 Degrees

Size: 1000 Cards - 210mm x 152mm x 105mm

Not for commercial use and only personal printing.
Follow for future updates and new designs.

Digimon Card Box V2 - Non Sleeved - 1000 Cards

Deck box V2 - 1000 - Digimon - Non-Sleeved.stl

500 Card Deck Box - Digimon - (88mmx64mm) Non-Sleaved.

Version 2 is here with click on lid and slotted divider design, store your cards with piece of mind that they wont get damaged!

Card boxes I have always found expansive and never suited to the need of mass storage with out it being a cardboard box. Protect your cards in a ridged box.
Really easy to print, best to have a PEI textured surface with glue.
Suggested Filament: PLA+ (DO NOT USE SILK)
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: However you please but I use 25% progressive halved every 10mm (max 5 times)
Shell: 3 layers on wall, 4 on top and bottom with one wall for roofing
Speed: 150mm, 50% on bottom and top layers
Cooling: yes
Supports: Not required
Max angles: 45 Degrees

Size: 500 Cards - 210mm x 81mm x 105mm

Not for commercial use and only personal printing.
Follow for future updates and new designs

Digimon Card Box V2 - Non Sleeved - 500 Cards

Deck box V2 - 500 - Digimon - Non-Sleeved.stl

250 Card Deck Box - Digimon - (88mmx64mm) Non-Sleaved.

Version 2 is here with click on lid and slotted divider design, store your cards with piece of mind that they wont get damaged!

Card boxes I have always found expansive and never suited to the need of mass storage with out it being a cardboard box. Protect your cards in a ridged box.
Really easy to print, best to have a PEI textured surface with glue.
Suggested Filament: PLA+ (DO NOT USE SILK)
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: However you please but I use 25% progressive halved every 10mm (max 5 times)
Shell: 3 layers on wall, 4 on top and bottom with one wall for roofing
Speed: 150mm, 50% on bottom and top layers
Cooling: yes
Supports: Not required
Max angles: 45 Degrees

Size: 250 Cards - 110mm x 81mm x 105mm

Not for commercial use and only personal printing.
Follow for future updates and new designs

Digimon Card Box V2 - Non Sleeved - 250 Cards

Deck box V2 - 250 - Digimon - Non-Sleeved.stl

125 Card Deck Box - Digimon - (88mmx64mm) Non-Sleaved.

Version 2 is here with click on lid and slotted divider design, store your cards with piece of mind that they wont get damaged!

Card boxes I have always found expansive and never suited to the need of mass storage with out it being a cardboard box. Protect your cards in a ridged box.
Really easy to print, best to have a PEI textured surface with glue.
Suggested Filament: PLA+ (DO NOT USE SILK)
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: However you please but I use 25% progressive halved every 10mm (max 5 times)
Shell: 3 layers on wall, 4 on top and bottom with one wall for roofing
Speed: 150mm, 50% on bottom and top layers
Cooling: yes
Supports: Not required
Max angles: 45 Degrees

Sizes: 125 Cards - 60mm x 81mm x 105mm

Not for commercial use and only personal printing.
Follow for future updates and new designs

Digimon Card Box V2 - Non Sleeved - 125 Cards

Deck box V2 - 125 - Digimon - Non-Sleeved.stl

Digimon Card Boxes V2 - Non Sleeved Collection

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships