March '26 Exclusive: Foul Firepower Multi-Pack
Hi friends! A request for an F-bomb really took off in our Discord, and we knew it was one we had to bring to life for you all. This one we'll let the design speak for itself!
For those of you who asked for it—hope it’s exactly what you had in mind! 😄💣
Foul Firepower Multi-Pack can be found HERE!
Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).
This pack contains 1 unique base designs and 2 cap designs. Each base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration.
Photo Colors 🎨
- Prusament Galaxy Black PLA
- Hatchbox Red PLA
- eSun Pine Green PLA
- Tttyt3D Silk Coffee Gold PLA
3D Printing Settings:
Layer Height: 0.2mm (recommended)
External Perimeter (Outer Wall): 0.33mm (recommended)
First Layer Extrusion Width (Initial Layer Line Width): 0.35mm (recommended)
Only one wall on first layer: True (recommended)
Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized)
Orientation: For the raised caps, print them face up so you have a nice textured surface.
⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker cap. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!
Stay Pawsitive! 🐾
Foul Firepower Multi-Pack can be found HERE!