By confirming your subscription, you allow Thangs to charge your card for this payment and future payments in accordance with their terms. You can always cancel your subscription.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
**
Filaments Used:**
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Purple Transmission Distance: 0.5
PLA Polylite Aqua Blue Transmission Distance: 3.8
PLA PolyTerra Forest Green Transmission Distance: 0.5
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA PolyLite Wine Red Transmission Distance: 1
PLA BambuLab Basic Jade White Transmission Distance: 5.7
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Purple
At layer #7 (0.64mm) swap to Aqua Blue
At layer #9 (0.8mm) swap to Forest Green
At layer #12 (1.04mm) swap to Savannah Yellow
At layer #17 (1.44mm) swap to Sunrise Orange
At layer #19 (1.6mm) swap to Wine Red
