By confirming your subscription, you allow Thangs to charge your card for this payment and future payments in accordance with their terms. You can always cancel your subscription.
"Bottom Dividers" always go below "Top Dividers" and are only needed on Bins that are taller than 1 cell. Bottom Dividers also stack on top of each other.
This Divider is 4 cells long (194 mm) and 1 cell high (50 mm).
Connection Types:
Connect the Divider to the Bin wall using Outer Wall Pins.
Connect stacked dividers using Dual Clips.
Connect Dividers to other Dividers in parallel using Inner Wall Pins.
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
For more information about printer settings, click here.
This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io
