Please include an actual bill of materials somewhere. It's great to be able to download all the parts at once, but if I'm trying to customize it it's still a pain to figure out what I need with how poorly the system is documented.
Took me a while to grok that too. You can put a multibin (or set of multibins). It doesn't need sides, since the multibins themselves don't really need that. If you use a 2x2 multibin for instance, you wouldn't even need the divider.
How do you mount this to standard Multiboard? I have a bunch of raised board under my desk already as I'm working on cable management with Underware 2.0. I wouldn't mind a couple of drawers, but I don't want to remove any of the boards already in place.
Super cool system and very stable. But mounting the big drawer on the plate with the little clip while the system is under the table is pain like hell. I have given up to try to use the clip mount.
Where can I find the STEP file for the part that looks like just one side of the Dual Clip included in this kit?
I searched for the remix file but couldn't find it. I'm trying to create my own part that attaches to the plate, similar to the Drawer.
Love the idea of this, but I do not think all the parts are in the pack? also given I have a bed size of 400mm x 400mm is there a better way to print the fixing plate!! Upright seems very counter intuitive.
Everytime I try to slice the 3rd file for under desk drawers it will start to slice then my computer reboots. I've tried it about 10 times. My computer never does this with any other file. It did start up with settings about a bambulabs printer and I switched to my printer the elegoo centauri carbon. I know its not my computer as it should definitely meet any requirements for any modeling software easily. Also the downloads were .3mf files and not .stl files. Not sure why.
Discussions — Under Desk Drawers #1 - Multiboard Pack (+ Video Tutorial)
Please include an actual bill of materials somewhere. It's great to be able to download all the parts at once, but if I'm trying to customize it it's still a pain to figure out what I need with how poorly the system is documented.
Its really hard to find all the pieces. It would be really nice if you put a link to each print in the comment.
Is it just me or is the handle for the drawer not in the files?
https://thangs.com/designer/Multiboard/3d-model/2L%20-%20Multibin%20Drawer%20Handle-1129027
Sure would be nice to have the shells and the drawers readily findable on this site. It's been NINE MONTHS, FFS
What is the point to the drawer that doesn't have sides but has that divider thing in it?
Took me a while to grok that too. You can put a multibin (or set of multibins). It doesn't need sides, since the multibins themselves don't really need that. If you use a 2x2 multibin for instance, you wouldn't even need the divider.
Do you know what height multibin fits? .75?
Is there a version for the A1 mini, please?.
A parts list for each build would be great! Having so many options is amazing however intimidating for sure!
Not all the parts are in the files. Only 3 3mf files in the Zip and not all the parts are included.
How do you mount this to standard Multiboard? I have a bunch of raised board under my desk already as I'm working on cable management with Underware 2.0. I wouldn't mind a couple of drawers, but I don't want to remove any of the boards already in place.
I have the same situation, did you figure anything out?
You need to z-calibrate your plate level. It looks good at some points, but it's too high where it gets stringy.
Follow along: https://www.youtube.com/watch?v=3MH3WpUjrJo
You can find the plate by using this (this is the 4x4)- https://thangs.com/designer/MultiBuild/3d-model/4x4%20-%20Single-Sided%20-%20Lite%20Multipoint%20Rail%20-%20Mounting%20Plate-1123562
Super cool system and very stable. But mounting the big drawer on the plate with the little clip while the system is under the table is pain like hell. I have given up to try to use the clip mount.
Where can I find the STEP file for the part that looks like just one side of the Dual Clip included in this kit? I searched for the remix file but couldn't find it. I'm trying to create my own part that attaches to the plate, similar to the Drawer.
Love the idea of this, but I do not think all the parts are in the pack? also given I have a bed size of 400mm x 400mm is there a better way to print the fixing plate!! Upright seems very counter intuitive.
Everytime I try to slice the 3rd file for under desk drawers it will start to slice then my computer reboots. I've tried it about 10 times. My computer never does this with any other file. It did start up with settings about a bambulabs printer and I switched to my printer the elegoo centauri carbon. I know its not my computer as it should definitely meet any requirements for any modeling software easily. Also the downloads were .3mf files and not .stl files. Not sure why.
Hi there, love the system. Is there a way to make drawers deeper? If I want one to be 6 deep rather than the provided 4? Thanks
What size of screws fit in the mount I have #6 1-1/4 inch Drywall screws, I can find the correct length no issue but what size should the head be?
I did notice this head size is too large.
As a subscriber how to I get access to "Multiboard Community Platform"?
The video is on the community page
we need video pls
Where’s the video?