If you are looking for the individual mounting components, search "MP59 or MP60" on the Multiboard page on Thangs. I stumbled on it purely by accident. Scratch that. Search " Half multipoint".
Go to the Plates page in the parts library, choose "Other Plates"and there are good choices there. I use "Thin Plain" for the bottom, then "Plain" for sides and front, with "Fix Point Hole MU" on back.
For truly small parts, a Multibin will be easier and use less filament though.
The parts that fold or fit together with a "keeper" between them. What problem were you trying to solve with the separation. The hook piece with the square "keeper" is so far resisting my efforts for assembly. I don't think they need supports for printing. What's the deal.
The bottom corner pieces don't print right. The layers distort and make the rectangular attach holes unusable. Everything else on the plate prints right.
My slicer ("Anycubic Slicer Next", an Orca derivative) throws an error on the "connections"-file:
"Error: 9 non-manifold edges". Does this matter or can I just print it anyway? I am not just simply trying it out because its a 9-hour print :)
Discussions — Simple Basket #1 - Multiboard Pack (+Video Tutorial)
Here are some of the individual parts of this to later help make your own size:
Beams: https://thangs.com/tag/MB242
Thin Plate: https://thangs.com/tag/MB235
Corners : https://thangs.com/designer/Multiboard/3d-model/Single%20Corner%20-%20Multiboard%20Beam-1322970
End caps: https://thangs.com/designer/Multiboard/3d-model/L%20-%20All%20Sides%20-%20End%20Cap%20-%20Multiboard%20Beam-1322955
Lite dual clip: https://thangs.com/designer/Multiboard/3d-model/Lite%20Dual%20Clip-1322956
btw, applied for the 10$ monthly just to download it. The files contain some crappy halfpoints, which got updated in the meantime. Overall, the setup of the basket is complex and a bit overengineered. Here is what you need on top: https://thangs.com/designer/MultiBuild/3d-model/Top%20-%20Small%20Thread%20-%20Half%20Fix%20Point%20%28Supported%29-1470859 https://thangs.com/designer/MultiBuild/3d-model/Small%20Thread%20Hole%20-%20Moderate%20Weight%20Bearing%20Snap-1354531 .....
The parts I posted are all in the snaps area. You can find the half points in the "related parts" on the newly updated website: https://multibuild.io/parts/snaps?Protrusion=Standard+%28Flush%29&Type=Moderate+Weight+Bearing+Snap
https://thangs.com/designer/MultiBuild/3d-model/Half%20Fix%20Point%20Hole%20-%20Moderate%20Weight%20Bearing%20Snap-1354525 https://thangs.com/designer/MultiBuild/3d-model/Inverted%20-%20Half%20Fix%20Point%20Hole%20-%20Moderate%20Weight%20Bearing%20Snap-1354530
Great build. But these half multi points need to be burned with fire.
If you are looking for the individual mounting components, search "MP59 or MP60" on the Multiboard page on Thangs. I stumbled on it purely by accident. Scratch that. Search " Half multipoint".
Did they rename them getting no results on "Half multipoint"? "Half point" seems to work though.
There is a 'filled' panel for that basket? I would like to store there some small components :P
Go to the Plates page in the parts library, choose "Other Plates"and there are good choices there. I use "Thin Plain" for the bottom, then "Plain" for sides and front, with "Fix Point Hole MU" on back.
For truly small parts, a Multibin will be easier and use less filament though.
can i get this in a custom ATX full tower PC case build
The parts that fold or fit together with a "keeper" between them. What problem were you trying to solve with the separation. The hook piece with the square "keeper" is so far resisting my efforts for assembly. I don't think they need supports for printing. What's the deal.
Worked perfectly. Probably should have used the stronger clips but I didn't really need it. I used PETG
The bottom corner pieces don't print right. The layers distort and make the rectangular attach holes unusable. Everything else on the plate prints right.
I am loving these! Have no doubt, I will be using them in my set up!
My slicer ("Anycubic Slicer Next", an Orca derivative) throws an error on the "connections"-file: "Error: 9 non-manifold edges". Does this matter or can I just print it anyway? I am not just simply trying it out because its a 9-hour print :)
I have the same error. Did yours print OK?
are the current l beams being updated to have the extra clip slots and multipoint holes?
Finally! Multibaskets and something to mount them with! Even if it is yet another dang mounting option, I'm glad it's here.
What's the ETA to getting the "half points" and their snaps added to the library?