DS Snaps - Grip Removal Tool
Use the “Grip Removal Tool” to separate any Double Sided Snaps (Part A’s and B’s). The tool is made to be extra tight going into threads.
Printing Guidelines:
The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
—
This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.
Explore and build the coolest, most adaptable workshop at https://multiboard.io
DS Snaps - Grip Removal Tool
Fix Point to Countersink Adapter
Flush - Small Hole Center Marking Tool
6.25 Offset - Small Hole Center Marking Tool
12.5 Offset - Small Hole Center Marking Tool
2x6 MU - Right Support End - Modular Bolt-Locked Shelf
4x8 MU - Center - Modular Bolt-Locked Shelf
2x2 MU - Right Support End - Modular Bolt-Locked Shelf
2x6 MU - Left Support End - Modular Bolt-Locked Shelf
8x8 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Right Support End - Modular Bolt-Locked Shelf
4x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Left Support End - Modular Bolt-Locked Shelf
2x2 MU - Left Support End - Modular Bolt-Locked Shelf
8x2 MU - Center - Modular Bolt-Locked Shelf
8x4 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Right Support End - Modular Bolt-Locked Shelf
8x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Center Support - Modular Bolt-Locked Shelf
This thing broke the second time I tried to use it. The threading is a little weak. K2_Kevin has a much beefier and imho much better solution to this.
Sorry to hear that. This is specifically designed for the DS snaps. However, after using it for about 100ish pull outs I found tha the thread dulled out too. I have a feeling the answer is not a thread-based tool. I'll keep refining and seee what it goes. I did try K2_Kevin design and it does not work at all for the DS snaps and then I found that my filament must have work layer adhesion as for me it the print orientation just sheerd the thread off.
My tenet is that a tool should generally be made of harder material than the substance it's working on. Hence, I made my removal tool with generic PETG, and printed it with 4 walls. It seems pretty durable, but YMMV.
Same here, the threading seems to be weak. I've removed 2 DS snaps and the threading is already dulled out...