4x4 LU - Tray
Trays can be placed on Drawer Shells or on Bolt-Locked Brackets). A Multibin Panel can also be paced on top of the Tray.
This Tray is 4x4 cells (200x200 mm).
- Drawer Shells: Place the Tray on top of Bin Shells that are Horizontal (usually Drawers). Attach it using X Multipoint - Rail Pop-Ins
- Bolt-Locked Brackets: Attach the Tray to the Bracket using a Bracket-Multipoint Adapter.
Learn more about this part at https://multiboard.io/knowledge-hub
Printing Guidelines:
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
For more information about printer settings, click here.
This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io
Fix Point to Countersink Adapter
Flush - Small Hole Center Marking Tool
6.25 Offset - Small Hole Center Marking Tool
12.5 Offset - Small Hole Center Marking Tool
2x6 MU - Right Support End - Modular Bolt-Locked Shelf
4x8 MU - Center - Modular Bolt-Locked Shelf
2x2 MU - Right Support End - Modular Bolt-Locked Shelf
2x6 MU - Left Support End - Modular Bolt-Locked Shelf
8x8 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Right Support End - Modular Bolt-Locked Shelf
4x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Left Support End - Modular Bolt-Locked Shelf
2x2 MU - Left Support End - Modular Bolt-Locked Shelf
8x2 MU - Center - Modular Bolt-Locked Shelf
8x4 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Right Support End - Modular Bolt-Locked Shelf
8x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Center Support - Modular Bolt-Locked Shelf
Tolerance is so tight that the multibin panel bows when placing in it.
You are using the wrong multibin plate. Use the "Drop-In Multibin Panel" one https://thangs.com/designer/MultiBuild/3d-model/4x4%20LU%20-%20Drop-In%20Multibin%20Panel-973834
Can ususally do 30mm bridges, but the top surface is botched since every surface above the holes is fully filled and has no chance to allow dimensional accuracy to return in the infill space. Will probably try again with tree support slim
Also, the edges are definitely too thin. Two shells only is not enough!
I also had an edge crack. This piece is too fragile to be used as intended.
Edge trim is so thin it instantly cracked!!! Don't use as designed trim need a chamfer fill or something. Trim split as I was removing from the build plate.