2 CU - Bolt-Locked Shelf Support Bracket
This Bracket only connects to Bolt-Locked Shelves. Screw in a Small Thread to Small Clip on the top side of the bracket. The bottom side attaches to a Regular Snap and is secured using a Locking Bolt.
This Bracket is 2 cells long.
Printing Guidelines:
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
For more information about printer settings, click here.
This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io
2 CU - Bolt-Locked Shelf Support Bracket
Fix Point to Countersink Adapter
Flush - Small Hole Center Marking Tool
6.25 Offset - Small Hole Center Marking Tool
12.5 Offset - Small Hole Center Marking Tool
2x6 MU - Right Support End - Modular Bolt-Locked Shelf
4x8 MU - Center - Modular Bolt-Locked Shelf
2x2 MU - Right Support End - Modular Bolt-Locked Shelf
2x6 MU - Left Support End - Modular Bolt-Locked Shelf
8x8 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Right Support End - Modular Bolt-Locked Shelf
4x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Left Support End - Modular Bolt-Locked Shelf
2x2 MU - Left Support End - Modular Bolt-Locked Shelf
8x2 MU - Center - Modular Bolt-Locked Shelf
8x4 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Right Support End - Modular Bolt-Locked Shelf
8x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Center Support - Modular Bolt-Locked Shelf
is it possible to download the older version of this model? The image on this page shows the old model, then the 3D image shows the new model? Does anyone have the older one? I accidently replaced it, not knowing it had been updated
I have the old file because I archive everything...yes, it would be nice if this mess was versioned and handed better. Yes, this new version doesn't work properly because the t bolts are too short to properly lock into the snaps.
What is the piece that threads into the end of this that interfaces with the underside of the shelf?
https://than.gs/m/1123334
This support bracket is not the right length. I need to support a bolt-locked shelf and it extends half a unit too far. Too long for a shelf with two slots and too short for one with three.