By confirming your subscription, you allow Thangs to charge your card for this payment and future payments in accordance with their terms. You can always cancel your subscription.
Charming Bunny-shaped piggy bank: Embrace a delightful way to encourage saving with this adorable bunny piggy bank. In a shape of a sitting bunny it will double as a decor to its intended functionality as piggy bank.
The piggy bank boasts a simple yet functional design including a removable cork that the user can take out and screw back in as many times as necessary to extend the use time of the piggy bank.
Bring back the classic joy of saving money within a piggy bank to remember the childhood.
DESIGN SPECIFICATIONS:
Bunny Piggy Bank:
Print Dimensions: Height = 19.1 cm (7.52 Inches) | Base = 13.7 cm (5.40 Inches) * 10.8 cm (4.25 inches)
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 4 hours and 57 Minutes
Amount of material required: ~49 m
Bolt for Bunny Piggy Bank:
Print Dimensions: Height = 0.85 cm (0.34 Inches) | Diameter = 5 cm (1.97 Inches)
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 18 Minutes
Amount of material required: ~2.5 m
TOTAL PRINT TIME: 5 Hours and 15 Minutes
TOTAL PRINT MATERIAL: 51.5 m
