The model is basically all outer perimeters with a ton of surface area, and most slicers go quite slow on outer walls. It all depends on how well tuned your machine and settings are, but I imagine you could shave a day off of that print time
also, please advise on other print settings, like bed temperature, fan speed, etc while printing from Bambu Studio, as we tried printing twice and facing first layer defects.
Yes, it's a slow print due to so many outer layers.. just make sure your sliced file has just 2 walls for the grid, no infill between the walls or trying to do the full wall with one extrusion
Discussions — CORRUGA Square Dish
Came here to say, thats a nice GIF :)
Would love to print except... Printing with Ender 3 V2, sliced with cura - 2 days 5 hours 40 mins
Why?
With my Ender 3 S1 Pro it took less than 23 hours. I could have sped it up more but it started to affect the print quality.
The model is basically all outer perimeters with a ton of surface area, and most slicers go quite slow on outer walls. It all depends on how well tuned your machine and settings are, but I imagine you could shave a day off of that print time
do you need suports
I can't even begin to imagine removing supports from this thing lol, kind of a masochistic thought.
No, but your printer should be able to handle overhangs well.
Trying to print using X1 Carbon. After slicing, it gives a warning - "The object has floating regions. Please re-orient or enable support generation".
Do I need to enable support generation? If yes, which? I see a lot of comments where Support was None. Please advise
also, please advise on other print settings, like bed temperature, fan speed, etc while printing from Bambu Studio, as we tried printing twice and facing first layer defects.
What setting to print in Bambu Lab? and should it take 13hrs?
Yes, it's a slow print due to so many outer layers.. just make sure your sliced file has just 2 walls for the grid, no infill between the walls or trying to do the full wall with one extrusion
Printed absolutely perfectly the first time! Really cool.
Do you have the raw form? I'd love to set the walls/tops/bottoms to 0 and experiment with infills for this.
This with a flat bottom would make an awesome dice tray
It takes one minute to add it!
Very nice! Any chance for a cylindrical version? Or has anyone modified this one?
My picture in no way captures the beauty of this piece.
Very nice project. I printed mine with Enisina (Eryone) purple gold PLA silk filament. 3 walls and resized to 115 %. Thanks for sharing
Hi! Thank you for this great creation! Do you think is possible to print it on 0.3 Z layer height?
It has some fairly steep overhangs so it may print cleaner at lower layer heights. I used .16... takes a long time, but worth it!
Reminds me prints you can get with wall lines and top/bottom layers set to zero (so you print only the infill).
Really cool design, congrats!
I just want to say what amazing design. love it.