**A small pencil case intended for travel. A quick-to-print and robust companion for drawing or taking notes.**
The Files are provided with and without the compartments. Without compartments it can also be used for other writing or drawing equipment.
Before insertion bend the lid in the front a little to ease up the living hinge. Move it in and out a few times to “sand down” minor print inconsistencies.

- Size closed: 190 x 50 x 20 mm
- Inner size: 180 x 42 x 15 mm 
- Maximum pencil size: 180mm length, 15mm diameter
- Compartment width: 12,6 mm

This is the V2 – The V1 is still included

**Print settings**
Required build volume: 210x210x30mm (can fit a even smaller print bed if rotated)
Material usage: 60g
Print time: 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
If your printer tends to warp – print the base with a brim

Pencil case

V2_Case_compartments.stl

**An elegant, robust and reusable notebook.**
Once you run out of blank pages you can just switch the paper out and keep the used ones stored with another rubber band.
depending on your paper weight up to about 20 papers do fine – that will then be 80 pages

**Versions included**
- For DIN A4 Paper – DIN A5 folded in Size – 220x220 mm bed space required
- For DIN A5 Paper – DIN A6 folded in Size – 160x160 mm bed space required
- For DIN A6 Paper – DIN A7 folded in Size– 120x120 mm bed space required
- For US Letter sized paper – with 3mm extra space around the paper – 230x230 mm bed space required
- For US Letter sized paper – with 1mm extra space around the paper - 220x220 mm bed space required
- For US Half Letter sized paper - 150x150 mm bed space required
- For 7 x 5.5 inch Paper - 3,5 x 5,5 Inch folded in Size – For premade American travel notebook inserts – 150x150 mm bed space required

**Instructions:**
- Choose your size (file of the back and cover).
- Choose your clip: The clip should fit into the cover with a little friction. Go for the clip_default first. If it is too tight use clip_more_clearance. If it is too loose use clip_bigger.
- Print two of the covers, the back and four clips
- Fold the paper in half (Tip: by folding them one by one the result will be slower but more precise in alignment).
- Assembly the notebook by inserting the clips and pushing them into the cut outs according to the images provided.
- Get a regular rubber band and put everything together.
- Enjoy!

**Print settings**
Material usage (Din A4): ca 200g
Print time for one notebook (Din A4): 17h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none

This design needs a decent print bed adhesion. Depending on your bed type measures like slowing down the first layer, increasing initial layer print temperature, increasing the first layer height, cleaning the bed with isopropyl alcohol or bed leveling may help. With a generally well set up printer the design is easy to print. If nothing else helps a brim can be used.
If the size of the print is very close to your print bed size, make sure to not even use a skirt to make it fit.

Please don’t use any filament with particles (like wood filament) for the clips since those are usually more brittle.

Notebook

Cover_DinA4Paper.stl

Clip_bigger.stl

**An elegant, robust and reusable notebook with a pen compartment.**
Once you run out of blank pages you can just switch the paper out and keep the used ones stored with another rubber band. 

Single and multi-color printing models are included as STL and 3MF! They work with all current and usual multi color setups.
depending on your paper weight up to about 20 papers do fine – that will then be 80 pages.
The pen compartment is 10 mm in diameter, but it fits larger pens, too. Since the covers hold the pen in place, you can even use ones with a clip! 

**Versions included**
- For DIN A4 Paper – DIN A5 folded in Size
- For US Letter sized paper

**What you need**
- The printed parts
- Two rubber bands – regular household ones
- Regular copy paper

**Instructions** (Go along with the images)
- Choose your version
- Choose your clip: The clip should fit into the cover with a little friction. Go for the clip_default first. If it is too tight use clip_more_clearance. If it is too loose use clip_bigger.
- Print two of the covers, the back and four clips
- Fold the paper in half (Tip: by folding them one by one the result will be slower but more precise in alignment).
- Assembly the notebook by inserting the clips and pushing them into the cut outs according to the images provided.
- Bind the pages with the rubber band.
- Insert the other rubber at the center of the back. A screwdriver or other not-too-pointy object helps here.
- Enjoy!

This is the V2, the V1 is also included as a zip

**Print settings**
Required build volume: DINA4 220 x 220 mm, US Letter 230 x 230 mm
Material usage: 220g

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Infill: 15%
Build plate adhesion type: none
Please don’t use any filament with particles (like wood filament) for the clips since those are usually more brittle.

Notebook with pencil case

Back_USLetter_paper.stl

DINA4_paper.3mf

USLetter_paper.3mf

School/deskware

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

Maddox3Dprints

Achievements

Seedling

School/deskware

Pencil case

Notebook

Notebook with pencil case