New Dovetail Attachment for The Rail v2!
I just added a new dovetail attachment for the Vertical Rail (The Rail v2)! This version uses a new and improved set screw to keep the dovetails in place on the dowel. I've been using these for a couple months now and am very happy with how they've been holding up.
The set screws can be tightened using an American quarter or the included printable coin. This makes it way easier to move the attachments up and down the dowel so you can arrange them how you want.
The wall mounts now use #10 - #12 x 1-1/4" screws and anchors. The previous version used #8 - #10 x 1" screws and anchors which are totally fine and work really well. So if you already have a Vertical Rail installed, don't worry about replacing your wall mounts with these new ones. The #10 - #12 x 1-1/4" screws are just a little larger and I wanted to standardize the hardware since the Horizontal Rail uses them.
I've also cleaned up the files. You'll notice there are only three .3mf files now - one for 1" dowels, one for 25mm dowels, and one for 23mm dowels. This takes all the guesswork out of choosing the right files since there are so many for the different size dowels. If you've already downloaded the Rail v2, you can download these new files without using one of your monthly downloads. Hope you like the new dovetail and let me know if you have any feedback!