Additions: 4.5" size for MCM Planter
I've been meaning to get this out for a little while! Loving this design at a larger size. The seam between the pot and the drip tray is really well hidden.
Because of the tapered design, the pot and tray are a little larger than most of my other 4.5" planters, but you can still squeeze both in on one 256 x 256mm build plate.
Print Settings
- .2mm layer height
- 15% grid infill
- 2 walls
Filament & Hardware
- Filament I used for this print: Overture Matte Light Brown PLA
- Hardware: #10-12 x 1-1/4 in screws
Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/